torque

  1. Pete999

    Wiha 18 piece torque screwdriver set

    WIHA 18 PIECE TORQUE SCREWDRIVER SET UNUSED | eBay Will sell off ebay if required
  2. Pete999

    Torque Drivers

    Probably been aired before, but how do the members rate the various Torque screwdrivers?, do they use them? and their opinion on the need to use them? if they have them what's the best set to get?
  3. MerlinGremlin

    torque screwdrivers

    I'm looking at buying a wera torque screwdriver attachment for my wera driver set, just wondering if anyone else is using a torque driver for tightening terminals or what people's opinions are about them?
  4. Dan

    Makita Combi Drill

    There is as new combi drill coming out brushless and 125nm worth of torque apparently the side handle may as well be a scaffold pole! Also around the same time there will be a 5ah battery launch! Currently out at the minute is the 36v range but instead of needing an expensive 36v battery that...
  5. P

    Torque Drivers again

    Hi Guys Assessor picked me up today (he has to find something!) on not having a torque driver for CU stuff. I'm going to buy one (forget the pros and cons). Can't seem to find a recent thread. So, what's around suitable, adjustable and reliable for £50 or less, please? I'll stick it on my...
  6. P

    torque screwdrivers

    anyone bought one yet? just wondered if there were any less expensive ones out there than the £100+ pounds at my wholesalers. and any decent reviews on them
  7. D

    Torque screwdiver

    Anyone use one in practice/ could recommend one? Not looking to spend £££'s! Thanks!
  8. B

    does any one know torque setting of wylex mcb

    Hi guys does any one know the torque setting for wylex mcb as the board has come with no paper work,and i have a torque screwdriver to try out Cheers in advance
    • beaver74
    • Thread
    • knowledge mcb setting torque wylex
    • Replies: 10
    • Forum: UK Electrical Forum
  9. R

    Dewalt 10.8

    Has anyone tried these DeWalt DCK211S2-SFGB 10.8V XR Cordless Drill & Impact Driver Twin Pack | Screwfix.com
  10. T

    Torque screwdrivers

    Sorry if there is already a post on this subject. With regulations stating that installed equipment is to be as per manufacturers instructions, what % of you folks use a torque screwdriver. Thanks
  11. thewyresparky

    torque screwdrivers

    i have my annual elecsa assessment next month. does anyone know where we stand as regards torque screwdrivers? will my assessor give me a non compliance if i do not possess a set?
  12. polo1

    Wiha torque screwdriver - views.

    Hi all, anyone use the Wiha torque screwdriver; if so, thoughts/views. Is there a better equivalent? Regards.
  13. applemac

    torque screwdriver

    evening good people, torque screwdriver before i have to shell for one of these extortionate things has anyone had a scam assessment of late? do they insist on one? ive come to except that regs will constantly extract every spare penny out me pocket, but im not going to shell out unless its...
  14. E

    makita brushless combi drill

    I currently have a makita BHP 451 combi drill, but on too many occasions recently i've found it too big and heavy to do what i want it to do. In the US of A they sell a brushless combi drill LXPH05, and theres a seller on ebay offering them for £80 delivered. from looking at the specs i can see...
  15. K

    Torque Settings for Brass connections

    Does anybody know where I can find generic torque settings for M16 brass connection. We are connecting to a Weg motor. Have tried the manufactures but had no reply yet, we have two guys waiting to connect.... Cheers
    • kodr
    • Thread
    • brass connections settings torque
    • Replies: 3
    • Forum: UK Electrical Forum
  16. Guitarist

    Torque screwdrivers

    So, boys and girls, I know this was done a while back but how are you all getting on with your torque screwdrivers? Worth buying to "comply with manufacturers instructions" or not?
  17. Strima

    Adjustable torque screwdriver set recommendations.

    Seen as we're now required to follow manufacturers instructions and are to torque screws where required can any one recommend any decent sets? Quite a big outlay from my budget so I want something decent and hard wearing. I'm not rushing into buying a set however if I see any on offer it would...
  18. Amp David

    Whia Torque Screwdriver

    Never realised how much I must of overtightened every screw in DBs and CUs in the past. Just used Whias Torque Vario kit on a new CU and cant believe how little tightening is needed for MCB terminals:tounge_smile:
  19. P

    Combi drill & impact driver, Milwaukee or makita?

    Hi all, Looking at getting a twin pack of combi drill and impact driver. Narrowed it down to either Milwaukee or makita, on paper the Milwaukee is winning with better torque for both tools. Anyone got any opinions on either?
  20. I

    Torque Screwdriver

    Does anyone know of a decent torque screwdriverfor tightening C.Us. thanks ian
Best EV Chargers
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

TrueNAS JBOD Storage Server

YOUR Unread Posts

Daily, weekly or monthly email

Receive a daily, weekly, or monthly email containing a digest of new and recently updated threads.
UK Tiling Forum | Tilers Forums
UK Tiling Forum by Tilers Forums UK
Plumbers Forums | Plumbing Advice | Gas Forum
Electrician Tips from Professional Electricians
JBOD Forums: a forum for JBOD storage server advice
JBOD Suppliers: JBOD Storage Server Supplies
Back
Top