Hi I am doing my unit 204 we have to list everything we need to set up and build the drawing I have uploaded I have written a list is there anything anyone would add to it?
Thanks
Please do not down load the above diagram and post on the internet. The TS is a private club and we can...
Hi Guys,
I came across an old MEM board a couple days back with 3871 breakers and 5419 main switch. It was metal board with no earthing and relying on the trunking as mains of earthing (no main bonding). As well as this no RCD protecting to sockets.
Obs a fail. Would you code 1 or 2 this...
Hi All
Is this allowed under amendment 3?
Yes its a conduit female end into the side of the CU with T&E coming out into the trunking.
No it is NOT my work!
I have a job of running a new cable to a DBB. The 16A MCB is in place and the oven is rated at 3.9kw so needs to hard wired. The customer has tiled walls and will not allow me to remove them to run the cable. He wants the oven switch surface mounted.
I have approx 0.5m of cable from DBB to the...
Anyone have any view on this product , seems to have descent reviews on Amazon , any of you with experience with one ?
Previously owned the red version liked it very much , just wondering if there's anything that might be better
I have a job coming up installing 3 compartment Dado trunking. Is there a standard or spec for which cables go in which compartment. I would assume that power goes in the centre compartment and data etc in the outer compartments?
I need to modify a rewinder paper machine. It has 9 motors in a row that each turn a blade to cut the larger reel down to size. The motors need to be able to move approx 30cm each side, to select the size of paper to cut. They are currently on a cat track but they are falling to pieces due to...
Hi All, I have a bit of a dilemma I need to get 4x 2.5mm T&E cables down from the landing into my kitchen cupboard and then into the under stairs cupboard where the CU is
I am aware of the safe zones that are 150mm from ceiling and internal corners but does this apply to a slope or curve as...
Hello everyone!
I've been asked by my boss to research cable trunking and wire basket for a job we've potentially got.
With regards to trunking and wire basket I have no experience.
Could you recommend me a brand/s and what I need to look out for?
I.e. is there a faster, easier wire basket...
Ackerman / MK Underfloor Bus Bar trunking for sale
6 x 3.6m lengths 63 amp
18 X Tap off box assemblies
Brand new never been used still in packaging. Over ordered from recent job.
Making some additions to this 50x100 trunking fitted in an office in August 2008. What brand is it so I can get new bits to fit?
More pics: https://drive.google.com/folderview?id=0B4b15PxUx4zffmJqbHZMMHduTjB0dnNwTzRfeXFnQmx5Y2lwTmhVN2piN2dMN2daTHo4NXc&usp=sharing
Hi guys
Just a quick one. Doing 2394/5 going through mock paper can't find answer anywhere. How would a continuity test on length of steel trunking be carried out? Any help appreciated
The above trunking been specified on a job in a science room,what a complete nightmare,just wondering if you guys have come across it.You can't use the main central carrier,only the outside compartment ,usually for data.My problem is,cables,2 rings & lighting cables,it's a tight fit,kind of...
We don`t usually mess around with commercial/offices. But i`ve been tasked with putting some power and data points in the office. Seems like dado trunking or the like is the best bet and lots of it...
So I`ve heard one of the best ways is to use a mitre saw for it? But i`m worried that the...
So a couple of months ago we had this .................
To end up with this.................... The panel is not as nice as I would have liked. It is not to any British Standard and both the Earth and Neutral bars were solid pieces of copper, which our lads were going to drill and attach 4-6...
Iam getting ready to sit my written part fr 2394 and theres acouple of inspections im struggling wih.
one of the practice qestions mentioned listing 5 checks you would carry out and the reason why
exmple plastic conduit
1. the conduit system- check its not damaged and its complete throught out...
Hi all,
A friend of mine has built a conservatory and has used surface mini trunking to contain the t&e for the lights, as the pvc blends in with the pvc panels of the conservatory.
I'm due to connect up the lights and wanted to know the best way and be prepared before u arrive.
I haven't...
Got a rewire coming up where I've managed to persuade owner to batten out and board the hallway but he can't stretch to all rooms, was thinking of running some 50x50mm trunking in top corners of rooms with 90deg angles and dropping down in plastic conduit (singles), don't want to drop down in...
taking some trunking off the walls and fitting dado trunking and adding few extra sockets in. Does this require the circuit to be rcd protected.
the circuit is protected by a 32amp mcb .
all sockets in dado.
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc