twin | Page 5

twin

Recent contents View information Top users
  1. M

    Baumatic BT2740ss twin oven frustrations

    Hello all, I have been working on a problem with a Baumatic BT2740ss twin oven, I have been Following manufactureres installation booklet but cant find the cause. Symptoms: The 8 function oven does not function at all, element does not heat up, fan and interiotr light do not function, the...
  2. M

    4mm twin and earth supplying garage cu

    Hi all, just doing an inspection in a house and noticed that the garage consumer unit is supplied by 4mm twin and earth run from the main consumer unit of a 32amp breaker. Garage consumer unit 100amp main switch and has 32amp- ring(4 sockets), 20amp -radial (1 socket) and 6amp lights(6...
  3. S

    Twin and earth

    Sorry, But im a newbie to domestics. Can Twin and earth be clipped to the brick work of a wall and then be plastered over? Or does it always have to be in capping? Using ordinary cable clips.....
  4. L

    price of 2.5 twin and earth

    where is the cheapest place to buy 200m of2.5 twin and earth at the momment 100m drums are fine
  5. H

    stranded ally earths in old pvc twin and earth

    A property is was looking at needs rewiring but as usual the client wants minimal amount of work needed just to bring the instalation up to current regs the lighting, bonding, defenatley need to be replaced but the sockets do have double insulated twin and earth but with stranded ally cpc not...
  6. N

    Twin Oven and Induction Plate question

    Hi Guys, I'm currently studying for my C&G qualification and I was asked by my Dad about his new double oven and induction plate. One of the Ovens is 2.2kW and the other is 2.8kW, also the induction plate is 440W. All appliances have 13A fused plug. If I apply Diversity to the whole setup...
  7. S

    how to wire fulrescent lights in twin and earth

    As above how to go about wiring a flurecent light in t+e wih one way switch? Thanks in advance
  8. M

    Twin and earth

    Just like to know is the white sheathed twin and earth cable with red and black stranded conductors still allowed to be used, if the old fuse box was replaced with a new consumer unit or will the cables need to be changed.
  9. C

    Twin Thermostat Supply

    Hi, Is it normal to run a twin thermostat imersion tank off a single time clock & single supply? My simplistic thought, not being a heating engineer, is that 2 supplies would be required in case both thermostats were used at the same time?:(
  10. C

    10mm twin & earth supllying DB

    Hi everyone ive been to look at a board change in a two bedroom flat the db is supplied from a meter room with 10mm twin & earth via a 63 amp switch its a tncs system. The earth from the met in the meter room to the 63a isolator is 16mm but from there to the db is only 4mm coming from the 10mm...
  11. C

    Twin Immersion Thermostats

    Hi again, I tend not to get involved with heating systems, but I have just been on a site where they have had a new Hot water tank installed with 2x immersion thermostat heaters in the tank, each of these is rated at 3Kw. Each has a separate feed with its own spur. There is no economy 7 or...
  12. Archie

    Twin & Earth

    Question for you all, I know it may have been asked a million times so here goes: Why is the Earth in a Twin & Earth cable not sleeved??? I Thank-you
  13. P

    Twin Boiler Wiring

    Went to wire a boiler the other day, got there and found 2 identical boilers paralelled up, a pump and valve for the hot water and a pump and valve for the heating! Boilers require pump run on. Thought of a modified 's' plan and relays to control the pumps but cant get pumps to run seperately...
  14. J

    PVC covered rubber twin

    Is there a name for this type of cable? I've come across the black rubber cables before but this has a grey pvc type of sheath on a rubber cable. The insulation resistance reading was just above 2 M.ohms, but the rubber conductors were in good condition. What advice should i be giving the...
  15. N

    Crimping 240v Twin and Earth - Safe??

    Hello, I would like to know what the regs say on crimping 240v 1.5mm twin and earth (single core) using red straight through crimps... Is it legal/safe/can it be done and pass inspection etc etc? What can I do/use instead of using a chockblock (connnector block) to join 1.5mm twin and...
  16. W

    stripping twin and earth

    anyone know of a tool for stripping twin and earth? apprentices are forever telling me your not supposed to pull the earth (what do they know) and i hate running the knife down it especially when im doing a db

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top