hi all. im to be doing a job starting next week, its installing underfloor heating supplies.
the system is rated at 200watts per metre. Its to be laid in 3 rooms, totalling 75m squared. theyre split into 33m, 19m and 24m. The guy was saying the floor installer reckons he will want about a 70a...
Hi there,
i had a job today where the customers underfloor heating stopped working.
i tested the mats and both were reading 32 ohms.
he had a spare controller stat so I changed it.
The stat sends 240v to the mats. But as it takes a while (he says it can take a good hour in his house) and with...
Am looking for a reputable underfloor heating company/supplier.
Client wants to use heat mats and wants a decent system. It's a small ish kitchen, say 7msq. Going to be tiled.
Loads over the Internet, but not much can be done when it's tiled!
Thanks in advance.
DL electrician
Thread
going
heating
insulation
meter
underfloorunderfloorheating
Evening guys
Got a job tomorrow to sort an electric underfloor heating apparently the under floor heating starts to get warm then trips the rcd
The builder disconnected the thermostat an tried again the floor got warm then tripped the rcd again
Any pointers would be apreciated
Thanks
spurs1980
Thread
again
builder
element
floor
heatingunderfloorunderfloorheating
Just in the process of first fixing a new house.
The under floor heating is:-
It will be an S plan plus with oil boiler. Have been told it's got its own pump and only needs a 3 core flex to it.
The way it displays the wiring to the boiler is a bit obscure and i don't have any info on the...
Hi
just want to ask
i been instaling heating mats before, but now I need to install 3 mats for large kitchen/ dining,
total 36 square meters of mats, each mat have 1680 Watts, and this need to be 1 zone - on one thermostat, maximum I can connect to thermostat is 3600Watts, We run separate cable...
Simoniz
Thread
contactor
heating
installing
panel
panels
under
underfloorunderfloorheating
Hello and thanks
Have a customer who will be having underfloor heating installed run from combined boiler and different zones can anyone give me some idea as to what's required to wire for such a system not done one of these before so advice much appreciated.
foghorn
Thread
boiler
centre
control
heating
system
underfloorunderfloorheating
wiring
looking for some thermostats that can be fixed to a standard single metal mounting boxes in the wall, on a first fix left fused spurs in every room for it, joined from one side with 20mm conduit to a box, with another conduit running down the wall for sensor and power cable.
I need to replace a thermostat on an underfloor heating setup, its about 10 year old so i can't get the same one and as i understand it the thermostat needs the right temperature probe otherwise it will be all messed up, i really don't want to try and get the probe out and try and get a new one...
I have been asked to wire a thermostat to and underfloor heating system on an extension I am wiring, the builder installed it and tiled the floor and threw the box and instructions away!!!! There is only L-N-E in the box to connect so obviously I cannot wire a thermostat. Is this correct or...
Posted this in the heating section earlier but didn't get a response. Any help would be great. Thanks.
Hello,
I recently attended a job where the underfloor heating programmer/ thermostat was broken. When chatting to the wholesaler to find a replacement he warned me that I would have to get...
Hello,
I recently attended a job where the underfloor heating programmer/ thermostat was broken. When chatting to the wholesaler to find a replacement he warned me that I would have to get the same make and model as the one that is broken. This is slightly annoying as I will have to order it...
Chris Electron
Thread
broken
floor
heating
model
thermostat
underfloorunderfloorheating
I have a problem with some underfloor heating can anyone help? Was called to a job as the underfloor heating had stopped. It appears the controller is showing the temp as 33.2 degrees and will not move down to bring the heating on. The controller upper limit is 35 degree when you set it to this...
BMW
Thread
controller
heating
probe
problem
underfloorunderfloorheating
Hi guys,
Went to see a job yesterday where the whole flat has underfloor heating, which has packed up and now they want a quote to replace this system with electric wall hung heaters. Because of the size of the property I reckon it will need at least 5 heaters. The property currently has 2 ring...
sl1210
Thread
heaters
heating
replacing
stats
system
underfloorunderfloorheating
wall
Hi guys,
A tennant has a problem with their underfloor heating not heating up at all. Its a Aube TH132F Thermostat.
When i put it on override and set the temperature high to 40 oC it keep going back to 18oC.
Does this need replacing, or is it a deeper problem with the sensor.
I have 230v...
sl1210
Thread
bypass
floor
going
heating
problem
thermostat
underfloorunderfloorheating
Can anyone offer some advice......
Customer recently moved into property, underfloor heating not working but looks like quite a new install. First problem i found was the switched FCU was faulty that supplies the underfloor heating - replaced that, switched on still nothing illuminating on the...
i was finishing off a new install of a pharmacy yesterday, when the guy asked me to wire the heating controls up as the underfloor heating has just been finished the day previous.
Although i have no real experience in this area i had instructions so said of course... (typical as a free extra i...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc