Hi guys, a customer has asked me to look at installing underfloor heating for them. i am completely new to this and dont know where to start to be honest. I want to say no but i am also good friends with her husband and so feel as if i should do it for them.
They are having their old wooden...
Hi,
I'm going to be installing underfloor heating mats (150w) but I'm after some advise on the insulation boards to put down first. They seem expensive I was wondering is there a cheaper alternative? Or am I going to just have to buy the boards they recommend with the mats?
Iv never installed...
Anyone any experience of the wavin underfloor heating system? Iv been informed by the homeowner that the plumber says I need 5 cores at each of the stats and that they are low voltage and programmable, now of course I can't get a hold of said plumber as he went on holidays, and I'm not sure if...
yo dudes
I just may be taking down my double conservatory and rebuilding in blockwork. This area of the rural house I live in contains the kitchen and bathroom and dog' clothes drying area. I am on oil central heating and thinking about electric underfloor heating if we go ahead.
I would...
I have just moved into a 3 bed end-of-terrace built in 1969 that was supposed to have still-functional electric underfloor heating in the concrete.
An electrician said it wasn't working and disconnected it (removed the thermostats and cut the cables running to the consumer unit, even though I...
Hi guys, just wondering if anyone installed an underfloor heating system in a house before? And if so are they energy efficient? thinking about installing one in my house but ive heard the energy bills are pretty hefty. (electrical obviously). Thanks , Lee (if the usual bell ends could refrain...
A school i work for on and off, are building a new classroom area and want it to be heated by electric underfloor heating, they want me to provide a cost, they are certain its what they want and cant have any radiators or wall heaters on the wall, and wont be able to supply a wet UFH system
i...
Hi, Has anyone used this company before? underfloor heating mats
Its for a bathroom approximately 5m square, is the 100watt man enough or should I recommend the 150 - 200 watt? Any alternative suggestions welcome, thankyou.
Had my assessment today and when looking through some certificates got asked why I had done a EIC for a spur for underfloor heating off a ring main which was connected to the heating system when I could have just done a minor works, I said to him I thought underfloor heating was notifiable which...
Hi there first post, but probably quite a complex problem.
I have built a solid plywood studio/office, all the walls floors and ceilings are made from 2no. layers of 24mm plywood Essentially a plywood tube with glass windows at either end. On top of this is a Flexel EcoFilmset underfloor...
Evening Guys and girls
Anyone recently installed a Klima underfloor heating matt? I recently supplied a power source to one in my in-laws house that was installed by the builder.
Seem to be gettting no luck with it working though, its a manual thermostat. There's power there and I can hear...
Hi,
Now I understand that this question may seem pointless, so humour me anyway...
A lady had underfloor heating installed about 10 months ago along with her new kitchen...
I was there for the kitchen install but didn't do the mats, there are two mats serving her kitchen and utility room...
Quoting on a 3 storey house underfloor heating system, I've installed some very small mats in bathrooms before but not a whole house, I've used heat store in the past and not had any problems, does anyone have any recommendations for a good manufacturer?
EICR, electric under floor heating taken off 16 amp rcbo, 2.5mm T&E radial for the electric immerser (which is used), via a SFS. Would you code or comment?Regards
Reading the installation instructions it states that a resistance test and an insulation resistance test have to be completed. No problem with the resistance test across the line and neutral through the foils that produces a figure well within the calculated tolerances for the area of film laid...
Anybody had problems with under floor heating fitted a 2m & 9.5m heatstore in parallel onto insulated board both tested fine before and after self levelling added and carndean wood floor tested ohms ok after left for about 8 weeks as customer not in house at time wired in and quick start on...
Morning all,
I may have to quote for electric underfloor heating for a new kitchen, flooring insulation boards are going in now so will be well insulated.. I never done any before, what is better - mats or cable and any recommendations? Ive looked at heatmat.co.uk you can get thin 3mm or 7mm...
I have some Thermonet UF heating controllers I found in my garage. Bought for an incredibly picky customer and she decided she didn't want them. I never got round to returning them so have decided to try and sell them. I have them on ebay but if anyone here wants them will do a better deal. 3 x...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc