Don’t.
I put two pairs in on 40 degrees and the slowest spin speed. On all four the steel toe cap has become detached and is moving around the inside of the shoe.
Expensive mistake.
Bonjour I'm a level 3 apprentice at the moment and have a side job to fit a double socket for a washing machine, only power is off a fuse spur supplying a gas boiler, which is also protected by a 13a, is this okay?
Hi. I'd be grateful if anyone can offer me some friendly advice please.
My washer stopped spinning and I discovered the fault to be a broken wire on the motor connector block on the washer side connector.
Here's a picture.
I took the motor out a while ago and cut the tiewrap that secured...
good evening,
just looked at a job where a glass washing machine is to be installed in a factory.
3 phase crabree board already there. plenty of spare ways and only load on the ccu is power and lighting and alarm system.
job request from customer, need a commando socket adjacent to drain to...
Hello
Useless female here....
I'm not sure if I'm in the right place but I have a quick question I'm hoping an expert can help me with!
My washing machine keeps blowing the electrics, I've managed to empty it of the clothes but drum is full of water.
Does this mean I have a faulty washing...
Fairly new washing machine with 2 problems.
1. When starting up a new wash, the motor turns the drum slightly. Repeats a few times, then runs as normal. Some form of starter on the motor failing?
2. The washing comes out after the program still wet. There's no puddles on the floor under the...
A washing machine (Hotpoint Aquarius WMAQF 641 P) and a tumble dryer (Candy GCC 590NB-80), which are well used in a hair salon, have a problem that the RCD regularly trips. The machines are plugged into a double socket which is supplied as a spur through 1.5mm flex cable in mini trunking...
hi, I qualified as a sparks in 2008 and after doing many maintenance contracts mainly with the NHS, I only have time to do private jobs and my own. It’s currentely my own that I’m in a tiswas with. I just changed my brushes on my Bosch machine WAE 24162uk/08. They were worn right down to the...
Hi Guys
Can anyone let me know who I can contact to discuss this installation? I work for a company in laundry industry. We (not me but our install team - most clever ladies in the office and bunch of subcontractors) installed washer in the riser. I escalated this issue 3 months ago during...
Hi all,
My washing machine is buzzing which I thought the motor was f&&*Ed but thought to test the capacitor by giving the motor a push start.
Starts just fine after which confirms it for me.
Anyone know any sites for spare parts?
Part number is 11.126/856-324
Not sure if this is the start...
Hello,
The layout for my kitchen, which is not installed yet, is such that there is a free-standing dishwasher and washing machine on either side of a cupboard which has the kitchen sink over it.
My builder who recently re-wired my house has installed the wiring so that the plug sockets for...
Hi folks,
I occasionally get calls for appliance repairs, and got one tonight from a stressed sounding chippy owner about his deep fat fryer. I politely turned him down and gave him the number of someone I know who deals with appliances, as I knows very little really. But then it got me...
A while back my daughter asked me to call in after work as her washer as leaking (aprox 2 years old)
I got there could see it had been leaking so checked all the hoses level switches etc all seemed well. Put it on without any load in it and watched it fill and empty all seemed normal. So I...
Hey all I'm sure it's an old frequently asked one but had a callout this afternoon where young couple just bought brand new high end Miele washing machine and had plugged into an old powerbreaker rcd socket in garage. As soon as it's turned on to start any program and door interlock operates as...
Hi Folks
First posting. My background is in joinery with any little knowledge on electricity picked up as I went along which isn't enough to answer my query.
The lad lives in a flat in a large block about 150 years old. In the flat is a room about 6 feet x 5 feet containing a wc and wash...
Hi,
Earlier today my washing machine tripped at the fuse box accompanied by a loud popping noise. It also took out a couple of other kitchen appliances as well as the house alarm system in the hallway. I switched it back to it's on position with plugs out of all appliances in the kitchen bar...
RustyNail1976
Thread
another
anyway
box
fuse
fuse box
machine
socket
tripping
washing
Hi any answers on why is my washing machine on upstairs ring main causing tripping of rcd,so I then ran a extension lead and run washing machine from downstairs ring and have no problems?
bluecallum
Thread
downstairs
machine
problem
rcd
tester
upstairs
washing
I would like to know whether I can run a 1/2hp (~380W) washing machine motor on a 600W (1200W peak power) pure sine wave inverter.
I had (famous last words) a 600W modified sine wave inverter which worked well off a car...
I would like to know if it is ok to run my washing mashine from my 1500 w modified sine wave inverter.
Spec:
Continental ce68618
Washing power : 450 Watts
dehydrating power : 160 watts
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc