OK so the time has come.....
.....I've done all my quals (C+G, 17th, NVQ3 and 2391) had a 2/3 years (mostly site, commercial experience) and some domestic (council flats work) but now I'm out on my own.
I have found a PJ. Mid size (mostly lighting (downlighters arghhh)) that NEEDS...
Hi everyone! I've had a browse on the net and on this forum but can't find any information on the photo attached
Young ladys flat in a block of apartments, this is the only telephone point that's wired up and it works perfectly with telephone and router plugged in.
Problem is, I've never...
Really struggling to find any info on this in google, had a peak under the floor at the existing wiring in my place which was made c1920's to see what state the wiring is in. The cables in the socket ring circuit are somewhere around 5mm 3 core silver coloured wire in flat outer sheath with red...
Sorry if this has been covered I but couldn't find anything.
Nor could I find information as to when white pvc t&e was first used in domestic installations.
When filling out test forms they ask the estimated age of installation, and if possible i'm after a timeline for the years that rubber...
Evening Chaps....
I'm after a 3 position switch so that I can switch a PIR between the following : perm ON / perm OFF / PIR mode
Not a pulse one though.
Any ideas, is there such a thing ?
Cheers Sy
Has anyone come across 1G or 2G blanking plates and surface-mount pattresses in white plastic which are easier to drill than the rather brittle plastic which seems to be the norm?
John Geddes
Derbyshire
HI ALL,
Seen some panels at great price, ET solar 235wp All looks good on the spec sheet along with ever solar inverter. Just wondered if anyone had heard of these so i can get some feedback before i buy!
Many Thanks
Thinking of putting these i the kitchen at home, thought this may be a good place to ask about what people who have fitted / used them think of them.
I'm thinking of getting the Natural White, but what do people think?
All,
Just been to see a chap who let a "friend" look at his boiler controls. The actual controller is a very old Drayton Tempus Seven
Its now not working!! and you'll see from the picture that its a bit of a muddle and most of the wires are white.
There are 5 cables entering this box so is...
are these worth getting? i'm looking for a basic ceiling light, nothing fancy, but needs to be low energy and come with decent bulbs that last.
have just fitted a 16W 2D CFL light (on my landing) and it gives off an awful white clinical light, and it flickers like mad on startup. so i'm going...
i have been quoted for phillips 7w dimmable warm white £23, gu10 lamp holder £2, magnetic white downlights mr16 £10 = 35 per fittting nearly
would you have any alternatives with this, iv noted haler do complete fitting for around 40...
any input to get my braoin going be great.....
hi all
got a job to re install an existing heating system.
i have a danfloss three port valve,four wire brown,white-grey-orange-blue
no tank stat
room stat
controler with ho****er only or ho****er and heating
any ideas...ive wired a good few systems but not come across this.
ta all
vito
Hi
I have an usual property with wooden eaves. In these I have outdoor lighting with about 10 R63 white bulbs in a plastic unit that has plastic arms that keeps it in place. The colour of these are white.
I have searched everywhere but just cannot find a replacement. Any tips on where to...
hi there need some help or adivise, i have installed at home an old accenta alarm what version it is i dont no there no marking on it, what i am asking if possible the keypad has never worked, i taken all 6 wires when out of the blue the alarm went of, can i replace first the keypad with a...
I would appreciate any advice on a job I have coming up which is a small pizza production kitchen.All the equipment is fixed floor standing with their own built in DOL switches.The main item is a pizza tractor/conveyor belt oven 32A plug and three processing machines with small motors 16A...
Hi Guys, a quiery for you, ( by the way I live in Western Australia) I was doing some work at the house today and was disconnecting some sockets for renovations, so i isolated the circuit but had to cut the T&E to get it out at the other end. Now the thing is that I have 3 phase incoming red...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc