2 way 2 gang hall lightswitch how do I wire

[Andy Essex]

1st time on here
I am changing a 2 gang lightswitch on my top landing that controls top landing light and the one on the floor below
The old switch is wired as follows
Blue wire with red sleeve to L2 top
Red wire to L3 top
Yellow wire with red sleeve to L1 bottom
Yellow with red sleeve to L1 top
2 red wires to L3 bottom
Black and blue wire to L2 bottom

New switch has the following

Top - comm , L2 , L1
Bottom L2 , L1 and comm

Can someone advise me what wires should go where

Thanks very much

 

[Taylortwocities]

You are misunderstanding how the switches are laid out. Please post photos of the wiring side of:

1. The existing switch before you disconnect anything
2. The new switch

 

[pirate]

blue, red, yellow, black...
where can i get that cable?

 

[Toneyz]

L1 is your new comm
L2 is your new L1
L3 is your new L2
But please take Taylors very good advice in post No.2.

 

[TJ Anderson]

Old L1 = New Common
Old L2 = New L1
Old L3 = New L2

 

[TJ Anderson]

Lol. You beat me Anthony

 

[ipf]

blue, red, yellow, black...
where can i get that cable?

….old colours.....3 core between switches (R,Y, blue)...twin from light (R, black).
OP, if you don't understand, get professional help.

 

[Toneyz]

L1 is your new comm
L2 is your new L1
L3 is your new L2
But please take Taylors very good advice in post No.2.

L1 is your new comm
L2 is your new L1
L3 is your new L2
But please take Taylors very good advice in post No.2.

And IPF's advice below
if you don't understand, get professional help.[/QUOTE]

 

[Pete999]

….old colours.....3 core between switches (R,Y, blue)...twin from light (R, black).
OP, if you don't understand, get professional help.

Or call an Electrician

 

[Dustydazzler]

2way switching gets DIYers every time , especially when the orientation of the new switch terminals is slightly different....

Even as a time served sparks I am very careful to identify the cores when I remove a switch just incase I get sidetracked

 

[Charlie_]

My favorite is when a light fitting is replaced..
“I put all the reds together and all the blacks and it just went bang”

 

[Spoon]

My favorite is when a light fitting is replaced..
“I put all the reds together and all the blacks and it just went bang”

But electrics is just 'red-to-red and black-to-black'.... Everyone knows that.

 

[telectrix]

But electrics is just 'red-to-red and black-to-black'.... Everyone knows that.

red to red, black to black, blue to bits.

 

[Andy78]

My favorite is when a light fitting is replaced..
“I put all the reds together and all the blacks and it just went bang”

Or "now my light won't go off" or "the light I fitted works fine but now the living room and kitchen lights don't work"

 

[Taylortwocities]

Rule1. Photograph the connections before disconnecting anything b