4Kw omnik inverters? | on ElectriciansForums

Discuss 4Kw omnik inverters? in the Solar PV Forum | Solar Panels Forum area at ElectriciansForums.net

S

solar-spark

Hi guys,

any of you lot heard of omnik inverters? they are chinese and have a g83 cert the data sheet looks ok but ive never
heard of them just wondered if they was any good?
these seem to be the only 4kw inverters i can get my hands on at the mo.
 
hope you bought two one as a spare cost a fortune to send one back to china for repair
4kwp inverters lots in stock made in europe if required
scott 07934 617201 24/7 collection delivery on sat/sundays
 
Actually nationally the failure rate is around 2%, which is in line with everyone else, but don't let facts get in the way of a good story.
 
We used one Omnik inverter. We have had one failure. Suppliers were as much use a rubber crowbar. Won't be using again.

Just lost out to a quote for a 4 kW system using this inverter for ÂŁ4,700. Apparantly it swithches on an hour earlier and an hour later. I had to laugh as the design in terms of voltage range is only slightly different to the sunny boys. It wont be hours it will be minutes at most.

Oh well.....we'd have made no profit on this job if we had matched them anyway
 
If they're anything like the idiots that threw the job in that we saw last week then they're probably saving money on scaffold. 45 degree angle roof with a load of panels thrown on with the top panel above the ridge line.

They also saved money on a decent electrician - the DC cabling was thrown in by a roof monkey and literally no clips were used. God only knows what we'd have found if we had have digged deeper into the job.

REAL and MCS registered. So that's what you're up against.
 

Reply to 4Kw omnik inverters? in the Solar PV Forum | Solar Panels Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
299
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
807
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
851

Similar threads

Hi all. OK... Let me just try and clear a 1" square space on the screen inbetween all the highly intrusive ads.... On a site (NHS in fact) and...
Replies
0
Views
400
Hi KungFu Turkey Leg and Mainline Thanks for the link Mainline I will see if they are any help. KungFuTurkeyLeg, as far as I can see the mppt...
Replies
3
Views
620

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top