Pete's Videos A clipping masterclass

[Pete999]

 

[telectrix]

some of these guys need to get a life and/or a day job.

 

[westward10]

What a c*ck.

 

[LankyWill]

Anyone who can't get a clip in with 4 hits is an amateur, his wife must of kicked him out for the day.

 

[telectrix]

a bloody hammer's length between clips? everbody knows it should be 3/4 hammer, according to the cable diameter, excepting of course for vertical drips when a hammer and 1/4 will suffice.

 

[Pat H]

Be a damn site less hard to bang in if you use the whole hammer handle length.
My dad used to shout at me "they made the handle that long for a reason son"

 

[telectrix]

if the mortar is very hars, you can use plugs for the nail clips. drill 4.5mm SDS, 1" deep, push in plug. nail.

 

[Specialist]

BT used to use a hammer length spacing but it was a cross pein hammer they used & the shat was shorter. Don't know why he has so much problem with blowing out the brick face, especially as he seems to be talking about drilling in not out.

 

[telectrix]

BT used to use a hammer length spacing but it was a cross pein hammer they used & the shat was shorter. Don't know why he has so much problem with blowing out the brick face, especially as he seems to be talking about drilling in not out.

where can a tool tart like me buy a hammer with a short shat? i want one.

 

[Pete999]

where can a tool tart like me buy a hammer with a short shat? i want one.

Get a long one and cut it to length

 

[telectrix]

Get a long one and cut it to length

i'm not jewish.

 

[DavidSpark]

I may have just become a bit accustomed to only horrendous videos detailing silly work practices being posted here. However, are there any glaring bits wrong with this video, or is this actually a good "how-to" video?

If this is so, perhaps a new subform could be established that is actually filled with helpful and good "how-to" videos!

Please rate this dumb or as appropriate haha!

 

[Leesparkykent]

chump.

 

[Pete999]

i'm not jewish.

I said cut to length what you mean has nothing to do with length, musseltoff.

 

[Specialist]

You tell him Pete, had me cringing in my seat