A gas question (sorry) | Page 2 | on ElectriciansForums
Guest viewing is limited

Discuss A gas question (sorry) in the UK Electrical Forum area at ElectriciansForums.net

SJD

-
Mentor
Arms
Joined
Feb 10, 2012
Messages
2,287
Reaction score
2,863
Location
Braccan heal
Apologies that this is a plumbing question, but I'm sure there will be people here who can answer this.

Working in a house today that is in the middle of a total refurb (gutted, rewired, replumbed, etc).
The gas supply is currently disconnected inside the house (in the hall), about 2m after the meter & shut-off valve.
This pipe end from the meter is open, if you opened the shut-off valve (under the stairs), you will fill the hall with gas.

Edit: for clarity, I've not opened the valve, I just supect gas will escape!

Now I never leave a cable with bare ends that can be energised e.g. accidentally by a switch, circuit breaker, etc.
I'd have thought it unacceptable to leave a gas pipe like this, perhaps it is even against some gas regs?
 
Last edited:
Years ago i had no worries working with gas installations on boats. gas cylinder usually in a vented outside locker, flexible rubber-type pipe from regulator to copper pipe, 2 jubilee clips...copper pipe throughout the boat to the cooker, short length of rubber pipe to connect the cooker to the copper pipe. Always checked for tightness, and cylinder turned off when not in use. Nowadays their are so many regs for such installations, despite the minuscule number of "incidents".
When changing the gas cylinder I used a swan to check for leaks...
swan???as in like a canary in the mine to see if it dies from gas???
 
swan???as in like a canary in the mine to see if it dies from gas???
I find that hard to swallow… If they didn’t thrush into things, they wouldn’t look like a --- so much.
I’m sure it’s ill- eagle anyway, however hawk-ward it is to be done properly.
As long as no one was puffin away on a ciggie nearby, they’ll think it safe.
 
I find that hard to swallow… If they didn’t thrush into things, they wouldn’t look like a --- so much.
I’m sure it’s ill- eagle anyway, however hawk-ward it is to be done properly.
As long as no one was puffin away on a ciggie nearby, they’ll think it safe.

I'm glad I've had a couple of beers.
 

Reply to A gas question (sorry) in the UK Electrical Forum area at ElectriciansForums.net

Similar threads

Thanks all for your comments, advice and suggestions. The following is probably pretty boring for most, and is simply a summary of how the job...
Replies
8
Views
757
S
  • Article
Capping off redundant pipework question. Hi all. I done some work for someone a few years ago and I've been getting paranoid that things haven't...
Replies
0
Views
137
sammy67
S

Recommended Sponsor News

Quickwire Now Sponsor ElectriciansForums.net

I am sure you will join me in welcoming our newest sponsors of ElectriciansForums.net - Quickwire! They have decided to join us after seeing you guys discussing their products here. Now we have an expert on board that you can chat to @Quickwire-Sam who will be happy to answer your queries!

[ElectriciansForums.net] Quickwire Now Sponsor ElectriciansForums.net


@Quickwire-Sam said "At Quickwire, we're all about speed, safety, and reliability. We're a family-run business, and every Quickwire connector is proudly made right here in the UK, ensuring noticeable quality. In short, Quickwire is the fastest connection method on the market. Whether you're an experienced electrician or a DIY enthusiast, Quickwire makes electrical connections ridiculously quick and easy. We're passionate about blending British craftsmanship with innovation. If you have any questions or if there's any way we can help, please just ask me!"

Exclusive Forum Offer! Free euro 2024 wall chart for first 10 responses!

Hi everyone,

We have 10 exclusive Uheat EURO 2024 Wallcharts to giveaway for Electricians Forum Members! The first 10 people to reply YES to this thread - I will message and get them sent out to you just in time for this years tournament! GO GO GO

PCBWay Now Sponsor ElectriciansForums.net!!

I hope you will all join me in welcoming our newest sponsor to the forum PCBWay! You can contact their friendly people by sending a message to @PCBWay who will be happy to answer your queries.

Welcome to the community and thanks for your sponsorship!

[ElectriciansForums.net] PCBWay Now Sponsor ElectriciansForums.net!!

PCBWay provides services including PCB Prototype and batch Production, PCB Assembly (SMT), 3D Printing, CNC Machining, PCB Design, Electronics Modules Selling, etc. We are committed to meeting the needs of global makers from different industries in terms of quality, delivery, cost-effectiveness, and any other demanding requests in electronics.

[ElectriciansForums.net] PCBWay Now Sponsor ElectriciansForums.net!!

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Thread starter

SJD

Mentor
Arms
-
Joined
Location
Braccan heal
If you're a qualified, trainee, or retired electrician - Which country is it that your work will be / is / was aimed at?
United Kingdom
What type of forum member are you?
Practising Electrician (Qualified - Domestic or Commercial etc)
If other, please explain
Running own small electrical company.

Thread Information

Title
A gas question (sorry)
Prefix
N/A
Forum
UK Electrical Forum
Start date
Last reply date
Replies
24
Unsolved
--
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top