Advice on local isolation of 14kw range

[LlandrilloSpark]

Fella's

I could do with your opinion on a local isolation switch for a 14250 watt range, the cooker in question if a belling country classic 100E, Im putting in a supply for it next week, I was going to run it in 10mm t+e as it is going to be in free air boxed in so could carry 63-70 amps, the family have a lot of partys and i expect the range to be pulling at least 75% most of the time and anyway i have to allow for full load, the full load is about 61amps, with most DP switches at 45A, any suggestions on how I can isolate it?, I was thinking 63A rotary nearby?

cheers

 

[stuart569]

50 amp switch with a 50 amp breaker!

 

[Des 56]

I love these cooker stories

I thought it was Spielberg who does the science fiction
No doubt a couple of years down the line and 25mm will be looking dodgy

 

[ian.settle1]

Fella's

I could do with your opinion on a local isolation switch for a 14250 watt range, the cooker in question if a belling country classic 100E, Im putting in a supply for it next week, I was going to run it in 10mm t+e as it is going to be in free air boxed in so could carry 63-70 amps, the family have a lot of partys and i expect the range to be pulling at least 75% most of the time and anyway i have to allow for full load, the full load is about 61amps, with most DP switches at 45A, any suggestions on how I can isolate it?, I was thinking 63A rotary nearby?

cheers

Can they not swop it for a dual fuel cooker eg gas hobs electric oven/s?

 

[Knobhead]

Imagine the fault current available at your food replicateor with quantum fusion generators feeding the consumer unit!

 

[Engineer54]

Were not in China here matey!!!!!:tounge_smile:

No your not, but even the Chinese wouldn't be that bloody daft!!

 

[ipf]

They've got a bloody big cooker in my local chinese.

 

[Engineer54]

They've got a bloody big cooker in my local chinese.

Maybe, ....but i bet it isn't an bloody big ''Electric cooker'', ....but a Gas one!!! lol!! Right??