Advice on V Phase Voltage Optimisation Units | Page 5 | on ElectriciansForums

Discuss Advice on V Phase Voltage Optimisation Units in the Australia area at ElectriciansForums.net

J

jenny8678

Hi I am looking for some advice and guidance with regards to the V Phase Voltage Optimisation Unit which I have been advised to have installed at my property.
Could anyone give me their views on this product and if it is worth spending the money as an investment ?
I have found one on trades supermarket vphase vx1 and would appreciate it if anyone could advise me of anywhere cheaper ?
Thanks for your help
Jenny:confused:
 
Last edited by a moderator:
I was only wondering how these vphase units optimise the voltage at 220v if the supply voltage was lower than 220v but I think he may now be trying to sell sand to the arabs:21: due to his lack of response

Completely unrelated to this thread subject but...... You would be surprised at the enormous amount of sand that IS sold to the Arabs countries. The sand they have in abundance, is totally unsuitable for building purposes, it's more of a chemical rich dust, than actual sand... lol!!
 
I have a bottle of Sahara Desert from a trip one time, and yes, it's more like flour than sand!
 
I was only wondering how these vphase units optimise the voltage at 220v if the supply voltage was lower than 220v but I think he may now be trying to sell sand to the arabs:21: due to his lack of response

Perhaps he has given up trying to educate idiots it is pretty obvious that if your supply voltage is less than 220v it wont benefit from being reduced.
 
Then more fool them, The V phase domestic unit is of little use to man nor beast. Expensive to buy, expensive and complicated to install, and pay back times are abysmal, as it runs more on the by-pass mode, than it does on what it was installed for, ....saving money mode!!
 
These days the management of a lot of organisations are non technical bean counters who will buy into an idea if they think it will save money and increase their bonus. Is it any surprise that some people are suckered in to buying this technology without considering the evidence and the facts or the lack of them
 
Then more fool them, The V phase domestic unit is of little use to man nor beast. Expensive to buy, expensive and complicated to install, and pay back times are abysmal, as it runs more on the by-pass mode, than it does on what it was installed for, ....saving money mode!!

Im an electrician and have brought one of these units (oh no I'm a defector) to have a play with, my main intention is to protect my equipment. Which is one point not mentioned here much..
Surely this unit has much more value in the fact it could be a life line to all your interconnected equipment.
Most of our equipment is designed around a European voltage and all those switch mode drivers in my precious led lights don't like 253v intravenously injected into its backside. Other things like laptop and computer power supply's, cfl lighting, central heating controllers etc will run cooler and last longer Cfls fail because they run to hot and the fridge is surely working harder than it needs too..

Could be the best ÂŁ60 I've spent!
 
Im an electrician and have brought one of these units (oh no I'm a defector) to have a play with, my main intention is to protect my equipment. Which is one point not mentioned here much..
Surely this unit has much more value in the fact it could be a life line to all your interconnected equipment.
Most of our equipment is designed around a European voltage and all those switch mode drivers in my precious led lights don't like 253v intravenously injected into its backside. Other things like laptop and computer power supply's, cfl lighting, central heating controllers etc will run cooler and last longer Cfls fail because they run to hot and the fridge is surely working harder than it needs too..

Could be the best ÂŁ60 I've spent!

Except when it goes into bypass mode above 20A,
 
Just had another thought, we go to all the trouble of calculating Volt drop (albeit at 230) and then introduce a whopping circa 20V drop at the origin with one of these devices.

Just a thought, hmm.
 
Except when it goes into bypass mode above 20A,

Which will be like never... Hopefully.
Ill just use it on lights and general power and even if we use above 4kw r It won't be for long.

If I could get them all for ÂŁ60 I'd even think about offering them to my customers, just for points mentioned about equipment protection let alone the (supposed) benefits of saving energy.

I brought it cash through eBay (brand new no box)

Not sure how well it regulates the 220v but looking at the components used it's pretty well made.
 

Reply to Advice on V Phase Voltage Optimisation Units in the Australia area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
271
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
766
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
771

Similar threads

Just stick the 63amp fused connector before the Henley block , or Lucy block as you call it, and your all good, as for your 2nd point, , the...
Replies
1
Views
993

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top