Anyone good on appliances?

[Boiler Repairs]

Seem to be having an intermittent fault on my AEG condenser tumble dryer. It occasionally throws up an EH0 code - which states it could be a power supply fault. I use an extension lead (white flex type), which I changed, but it’s still occurring. I’ve been used a plug checker, which states everything is ok. I have to keep sponging the bottom bit out (where the water filter is).

Anyone any ideas?

Many thanks.

 

[telectrix]

hang the washing out in this weather. get dryer fixed after corona.

 

[cloverman]

Silly question perhaps, But did you try resetting ?

 

[Boiler Repairs]

Silly question perhaps, But did you try resetting ?

Yes I did, it’ll turn off and on, and I always unplug it after use. I’ve had the top off today to check for voltage present and also for any visual loose connections, but all seemed to check out ok.

 

[davesparks]

If your regularly sponging water out of it then that suggests that there's a problem casuibg the build up of water, this could easily be causing an intermittent electrical problem.

 

[zeus20]

U can do a reset according to the manual of the device

 

[tony clark]

they fill up with lint which can cause the moisture try clean out as much as you can if its a condensor dryer you will have to do a full strip down

 

[static zap]

they fill up with lint which can cause the moisture try clean out as much as you can if its a condensor dryer you will have to do a full strip down

Also check door "filter" for any damage / split = not too obvoius... more lint where it doesn't belong ..
(I'll be going back to blowing warm air outside ..)