Could be starting a new position with a stair lift company and wanting to know of anyone with experience in this sector to maybe give me some pointers. From what I have gathered there is 3 main PCBs that control the lifts, inverter for speed control and then motors and limit switches. Probably a lot more to it but these I would think would be the main issues.
Never really worked with PCBs before and there is training provided at the beginning, but Id like to get a headstart and get some learning in now so Im not just a nodding dog. Any references, books, videos or advice Im open to all suggestions.
Ive worked with motors and limit switches before, I can setup basic programs in Inverters and read fault codes from them, however its the PCBs that could be scary due to lack of knowledge.
Thanks in advance
Never really worked with PCBs before and there is training provided at the beginning, but Id like to get a headstart and get some learning in now so Im not just a nodding dog. Any references, books, videos or advice Im open to all suggestions.
Ive worked with motors and limit switches before, I can setup basic programs in Inverters and read fault codes from them, however its the PCBs that could be scary due to lack of knowledge.
Thanks in advance
