Anything you can do I can do better!

[D00DY_T00DY]

No you can't. yes I can!

Another (late) friday game.

Thought it'd be fun to have a p**sing contest
Someone says work they've done before reply if you've done it bigger and better.

I can see this being fun as there's someone(tel) that'll go over the top

Biggest cable I've worked on is 35mm 3 core armoured

Go!

 

[jackhammerJIM]

can't say i have Des . Your a star btw

 

[Rocboni]

Standing inside a rotor? You mean stator?

 

[Pete999]

Cleaning dead Starlings from a Salt Water load bank for a Paxman 410 gen set

 

[Des 56]

Standing inside a rotor? You mean stator?

Your dead right,it seemed like an impossible act the way it was writtenI did clean both.

 

[Dave OCD]

Installed genuine gas lanterns [decorative copper and expensive] with mantles inside - well I didn't do the gas connections but did the power to the solenoids fed via a wall mounted streetlighting PEC.

 

[freddo]

Don't do much big stuff, but 500mm single core AWA and 2H25 MICC. I've also altered a load of 4" copper pipe if that counts.

 

[davesparks]

Biggest firework I've hand-fired is a 6" aerial shell.
Biggest firework I've worked with is an 8" aerial shell.

 

[Paul228]

When I was an apprentice for BT ( scum company to work for, but I digress).
We had to joint a 4800pair cable.
A 1m length was a two man lift.
It took 60man hours to joint and seal.
Drove us mad... So I thought I'd change tac and become a sparky...best decision ever.

 

[D00DY_T00DY]

Winning £200 on the football
Doing well this week boys

 

[dmxtothemax]

QUOTE - [No you can't. yes I can! ]
Lets call the whole thing off !

 

[Wilko]

Going the other way, I have hand assembles circuits with individual transistors (FETs) that had gate structures less than 1 micron. The unit was less than 1mm in any dimension. And yes, I dropped it, and my boss suggested I take up a career in motel management