Are you based in Frimley????????

[Octopus]

So I got a call from a customer asking me about something I did in Feb 16 - so I duely paid a visit. Knowing they had had some work done I asked if I could see the certificate..... as I didn't take mine with me!

Now bearing in mind a new fuseboard had been fitted, the kitchen had been hacked around, downlights had been fitted and a wall removed I was expecting an detailed EIC........

Er no, the EIC simply said replacement fuseboard..... which had all 10 "slots" used.

This is a photo of the test results sheet.........

Sorry its side ways

Anybody want to play "spot the mistake / ommision / unusual entry" with me?

 

[Strima]

R1 is a tad high...

 

[westward10]

Ring final 9 appears to be rather long and open circuit on the lines. Seems they didn't loop it either or several of the others.
They also have 4.0 cpcs on the 6.0 cables, assuming T&E.
No IR readings.

 

[Deleted member 26818]

How many DBs are there if this is #1?
How is measured Zs N/A for RCDs?

 

[streamer]

Ring final 9 appears to be rather long and open circuit on the lines.

And it seems to be wired in 6mm!

 

[Wilko]

I have done a couple of jobs in Frimley, so my heart skipped a beat ...

 

[Octopus]

I was wondering what Nt meant?
Why only 9 circuits are listed, yet there are 10!

 

[westward10]

Not Tested.

 

[Octopus]

Is that an acceptable entry for an EIC, especially as it was a new circuit.

 

[westward10]

From what I can see there are no tests whatsoever for those two circuits.

 

[KEV 1 N]

Dear me, I could have fabricated a better test sheet sitting at home with a cuppa!
Not supposed to put LIM on an EIC.
There's and old saying "If it looks right, then it is right"
This clearly isn't right.

 

[WillWX]

Is it just me or why even bother filling one out?!

 

[Wilko]

It's not just you ... I'd be suggesting to Client the last lot should return and provide one done to standard. If they hesitate, perhaps offer to email original to their CPS for review

 

[Octopus]

I was wondering about forwarding a copy to Elecsa .. I do have his details and number!

 

[westward10]

You probably need to pose any queries you have to him first.