Aritech CS350 Open Zone

[chris gray]

 

[chris gray]

Other

 

[chris gray]

Other View attachment 46944

 

[Retrosparks]

The resistors are in the right terminals, it looks like in the first picture the blue/white wire to the second detector is not connected to anything, try connecting it to the white wire that it is twisted to.

Can you post a better picture of the first images terminals, I am finding it hard to see whats connected to what.

Ideally the wires joined by twisting need soldering and insulating too.

 

[chris gray]

They’re what the op sent me. I put them up as I couldn’t really make out each conductor either

 

[Traveller19]

Hi guys. Thank you for everyone’s help in trying to resolve this issue, I do appreciate it.

Here are my thoughts, when both PIR’s where installed - either side of a partition wall - I believe that a single cable was used and the wires spilt between the two PIR’s. When reinstalling the two new PIR cases the wires where not long enough, so a different cable was used with different colours. So as you guys have worked out the white/green and white/blue wires aren’t connect at all.