Bathroom light help please | Page 4 | on ElectriciansForums

Discuss Bathroom light help please in the UK Electrical Forum area at ElectriciansForums.net

Joined
Dec 4, 2017
Messages
10
Reaction score
-3
Location
Edinburgh
Ive screwed off the old light thinking it would just be a matter of screwing other straight in the same way the problem I’m having is the wires from the ceiling are too thick to fit into new light fitting, there’s 3 earth wires that we’re intertwined together but I unraveled them, I think the other is a live and 2 neutrals. Will I buy a new light?
 
Jesting aside....Magners with the connections on the existing wiring there is the real possibility of causing dangerous problems to the entire lighting circuit if you get it wrong....with no indication that you have done so because it can be dangerous and yet still work.
As you appear to have very limited electrical knowledge a relatively small charge for a local electrician would be money well spent.
 
Maybe he sorted the light out, its all working and his wife thinks he is the DIY DON and is all over him, cooked him steak and the BJ is ready once he has finished his after dinner mints and glass of expensive brandy, you lot should take note........... you could get lucky one day.


Maybe but that would involve me having to admit that someone with no training or experience can figure out for himself what only superhuman sparkies can do.

It's easier to sneer and belittle these people from my armchair and in doing so make myself feel that little bit better bout my miserable stake and BJ free existence.
 
Maybe but that would involve me having to admit that someone with no training or experience can figure out for himself what only superhuman sparkies can do.

It's easier to sneer and belittle these people from my armchair and in doing so make myself feel that little bit better bout my miserable stake and BJ free existence.
Sets up a gofundme page for GBDamo for steak hookers and coke....... ;o)))
 
Don't forget to fit a smoke alarm next to it.......and have 999 on speed dial!

Seriously though, get a spark in, probably cost around £40 depending on area... It is a simple job if you know what you are doing...
 
Don't forget to fit a smoke alarm next to it.......and have 999 on speed dial!

Seriously though, get a spark in, probably cost around £40 depending on area... It is a simple job if you know what you are doing...
Not Pete999 I hope:)
 

Reply to Bathroom light help please in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
373
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
939
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

Not to mention welding switch contacts together and wondering why when they thought they had got the wiring sussed the light will still not switch...
Replies
5
Views
562
Brilliant thank you so much for your help 😊 x
Replies
6
Views
534

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top