Best deals for Wago | Page 2 | on ElectriciansForums

Discuss Best deals for Wago in the Electrical Tools and Products area at ElectriciansForums.net

Just put an ridiculous order in...let us see if their pattern-spend anti-fraud software is working...
 
Can you use the over there?

1. They'll be upside down
2. Might no have the Aussie standards.

I'll just put them on backwards, that should cancel out the upside down. AS3000 just says connectors must be of a design to prevent escape of single strands. We don't see a lot of wagos here it's mostly BP screw connectors; I'm on a bit of a crusade to convert my workmates I've got the wago bug hard since trying some.
 

https://www.amazon.co.uk/WAGO-221-412-Connector-Terminal-221 412/dp/B00JB3U7Y6/ref=sr_1_2?ie=UTF8&qid=1479923337&sr=8-2&keywords=wago+221+412

It's a typo, note the price per item at the top, but one that should get you a refund at least. Take a screenshot before they change it after you complain when you get 10.

Have screenshot already Andy ;)

It does say 39 pence per 10... I am starting to feel slightly guilty now! But if they do send 100 I won't complain!!
I note someone asked the question about pack size and the seller responded that they ARE packs of 100 lol....I am also IN as the dragons would say.
Is this a pack of 100?
Answer:
the item that opens with this link is a pack of 100. they tend to come in packs of 100, 50, or ten.
By B Walker on 26 July 2016
Yes.
By Rick, Maidstone on 26 July 2016
Yes, this is pack of 100pcs
By MKShopUK SELLER on 26 July 2016
 
As an Amazon Associate Electricians Forums may earn a small commission from qualifying purchases.
I got email confirmation that my order has been despatched this morning. :) They will be inspected carefully when they arrive...
 
Is there a mf enclosure for them yet?

Not to my knowledge. Last time I checked there are only a few certain Wagos that can be classified as MF when certain caveats are met whilst installing them. None of the lever type Wagos were included in the MF category.

Don't think there is even a proper enclosure for them yet, where they fit snugly. Line grenades aside.
 
No idea! You don't! That info was from last time I looked at the Wago gumph. Only a few types of the push in type could be used for MF. I am guessing that is all that has been extensively tested and passed as being fit for MF from their range so far.
 
Well if you cannot, its maintence free then :D

Joking aside, I never realised there was an acutual list. School day and all that...
 
Well if you cannot, its maintence free then :D

Joking aside, I never realised there was an acutual list. School day and all that...

Hi Lee,

The last time I saw the conditions etc was on a little flyer which came with the enclosure. Obviously the enclosure is stamped MF. And certain Wagos could only be used, and the enclosure had to be cable tied too. That was a little while ago now though so it may have changed.

I normally use the Hager MF if needed, but always trying to make sure there are no inaccessible joints is the obviously the better way.
 
I got email confirmation that my order has been despatched this morning. :) They will be inspected carefully when they arrive...

Well mine came today. I was expecting 6 boxes of 50 3 lever and 6 boxes of 100 2 lever. I got 6 individual pieces of each.
Called the seller directly and they apologised profusely for the incorrect listing, issued a full refund and let me keep what had been delivered. Ah well.
 

Reply to Best deals for Wago in the Electrical Tools and Products area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
438
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
1K
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

Something to do with the plastic notes, and the way you hold it to make it rigid, amplifies the vibration somehow. Might only work with Scottish...
    • Like
Replies
12
Views
1K
Thanks all for your comments, advice and suggestions. The following is probably pretty boring for most, and is simply a summary of how the job...
Replies
8
Views
895

Electricians Tools | Electrical Tools and Products

Thanks for visiting ElectriciansForums.net, we hope you find the Electricians Tools you're looking for. It's free to sign up to and post a question yourself to find a tool or tool supplier either local to you, or online. Our community of electricians and electrical engineers will do their best to find the best tool supplier for you.

We also have a Tiling Tools advice from the worlds largest Tiling community. And then the Plumbers Forums with Plumbers Tools Advice.

Search Electricans Forums by Tags

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top