capping | on ElectriciansForums

Discuss capping in the Australia area at ElectriciansForums.net

lewlec

-
Joined
Jun 3, 2008
Messages
262
Reaction score
8
Location
west wales
hi all

we never use capping on our installations and i was just wondering would it be faster & cheaper than using cable clips?? any thoughts would be appreciated.

cheers
gary
 
galv or pvc conduct all the way
STOP THE PLASTER REACTING WITH THE PVC AND IF ANY FAULTS ON THA CABLE YOU CAN NORMALLY PULL BACK DOWN WITH OUT CHASING OUT
the use of just clipping to walls is extremely rough and not recomended
 
hi

thanks for your replies, i suppose its the way ive been taught really. to be honest i dont think any sparks round my way use capping or oval conduit... i might give it a try on a newbuild next week.

regars
gary
 
Never had a problem with capping, always use metal though as it stays straight unlike the plastic

20 mm conduit is ok but you probably then need to chase the wall and the cables need to be straight and parallel to get down the tube
 
I don't get on with capping, always a bugger getting the little nails in, any tips on that?
Conduit all the way...............:cool:



Never had a problem with capping, always use metal though as it stays straight unlike the plastic

20 mm conduit is ok but you probably then need to chase the wall and the cables need to be straight and parallel to get down the tube
 

Reply to capping in the Australia area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
321
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
848
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
971

Similar threads

S
  • Article
Capping off redundant pipework question. Hi all. I done some work for someone a few years ago and I've been getting paranoid that things haven't...
Replies
0
Views
154
sammy67
S
  • Question
Hi, We would like to have installed new single powerpoints which are on the skirting boards of our old house. However the existing ones we have...
Replies
0
Views
416

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top