CK Automatic or Irwin Vise Grip Wire Strippers?

[midiman]

Hi,

Does anyone have any experience of any of these tools?

Some people say that the Irwin ones are better quality.

Thanks

 

[sevuk]

Klein tools automatic wire strippers are a LOT better than the CK version. I've never been convinced before, but saw a guy demo them and they are phenomenal. Must pick up some at some point, I think you can only get them at CEF.

 

[pirate]

and the Klein ones are currently on offer at CEF, for £22.50 plus vat which is an ok deal, methinks...instore purchase only.

 

[sevuk]

and the Klein ones are currently on offer at CEF, for £22.50 plus vat which is an ok deal, methinks...instore purchase only.

I might have to nab that.

 

[rsgaz]

The Irwin ones can't fit 1.25mm² flex in them. I had to grind a little bit off the jaws to be able to cram it in there.

 

[midiman]

CEF are only by me so I could pop in and get some.

The Irwins are automatic too and have some good reviews.

Self Adjusting Wire Stripper / Cutter | CEF - http://www.cef.co.uk/catalogue/products/4226136-self-adjusting-wire-stripper-cutter?q=wire+strippers

Irwin Vise Grip Self Adjusting Wire Stripper and Crimpers VIS2078300 - https://www.sealantsandtoolsdirect.co.uk/manufacturers/irwin_tools/irwin_vise_grip_self_adjusting_wire_stripper_and_crimpers_vis2078300_P28706.html?gclid=EAIaIQobChMI7ZCG2c_e1wIVzLDtCh1Jww6MEAQYASABEgKDQPD_BwE

Thanks

 

[midiman]

The Irwin ones can't fit 1.25mm² flex in them. I had to grind a little bit off the jaws to be able to cram it in there.

I would like something that is generally capable of stripping 1mm - 2.5mm.

 

[Pete999]

Klein tools automatic wire strippers are a LOT better than the CK version. I've never been convinced before, but saw a guy demo them and they are phenomenal. Must pick up some at some point, I think you can only get them at CEF.

I would like something that is generally capable of stripping 1mm - 2.5mm.

https://www.amazon.co.uk/CK-Electri...1782032&sr=8-1&keywords=ck+electricians+knife
Best wire stripper going

 

[sevuk]

I would like something that is generally capable of stripping 1mm - 2.5mm.

C.K VDE CombiCutter 3 160mm - https://www.screwfix.com/p/c-k-vde-combicutter-3-160mm/31773

this will do it

 

[midiman]

C.K VDE CombiCutter 3 160mm - https://www.screwfix.com/p/c-k-vde-combicutter-3-160mm/31773

this will do it

Will they do the out sheathing too?

I like the look the of the automatic ones because you can put a bit of cable in and strip it down to the inner cores.

 

[Pete999]

Will they do the out sheathing too?

I like the look the of the automatic ones because you can put a bit of cable in and strip it down to the inner cores.

The CK knife will

 

[sevuk]

Yeah the combi cutter wont do the sheath, you'd have to pull the earth back and then cut the split sheath out. Not very neat, but that's how most people do it.

 

[Pete999]

Yeah the combi cutter wont do the sheath, you'd have to pull the earth back and then cut the split sheath out. Not very neat, but that's how most people do it.

Do it the proper way:with a decent folding knife or an Electricians knife

 

[midiman]

Yeah the combi cutter wont do the sheath, you'd have to pull the earth back and then cut the split sheath out. Not very neat, but that's how most people do it.

The videos show you it cutting the outer sheath from the cable.

 

[Pete999]

The videos show you it cutting the outer sheath from the cable.

All very nice if all you want to do is strip 2inches of outer sheath, how about stripping longer cables, as in a CU install? not very practical really are they, a waste of hard earned, and I'm a tool tart, wouldn't insult my tool bag with a pair of those,