Dodgy trade pictures for your amusement! - 1 Million Views!

[Darkwood]

Right ... Just been nudged to set this up by Paul.M and sounds a good idea following recent threads I've done in the Arms..

Rules....No Offensive material... edit if required before posting as this is the public arena.
Anything to do with the trade or in and around it ...H&S pic's welcome.



I've posted this a few times and this is at a mates house following a kitchen refirb several yrs ago. mg_smile:

 

[Fazz711]

Found this at work when asked to reinstate an extract unit.
Boss thought it may be disconnected in the DB.
Traced swa and found still conneto the trunking.
Looked on the DB and found the machine name was there but with another machine on the same circuit.
Removed the cover found this.
Machine wanted is the smaller cable.
Removed the larger cable after asking OPs about the other machine and was told it was removed a while ago.
Got the extract working and then set about tracing the other swa.
Traced to a 32A three phase socket.
The type with its own breaker.
This was cable tied to the tray work high up.
Set about removing it and found the DB end had no earth.
Thought not good but at least it was connected to the trunking properly but with no earth from the banjo to DB.
Then came the worst of it.
Remoethe top off the plastic three phase socket and found no earth at all.
The machine ran for years like this with no earth protection.
Asked the mechanical engineer and he said they had had a few dodgy sparkies in the past.

 

[Dean. Sinnett]

Nice Plumbing installation shame there's a fault on the circuit Advised the customer to get his plumber back and remove the plug.. lucky for me it was a callout..

 

[DPG]

Nice Plumbing installation shame there's a fault on the circuit Advised the customer to get his plumber back and remove the plug.. lucky for me it was a callout..

Who the flip does that!?!?

 

[freddo]

You would have to be a right cnut to do something like that.

 

[Baddegg]

Who the flip does that!?!?

Wetpants wetpants wetpants ?

 

[Dustydazzler]

I thinks that’s what’s called an inaccessible joint

 

[freddo]

Would have been quicker to go and buy 2 holesaws than do this!

 

[Bellendian]

Looks like a farmers job to me!

 

[DPG]

Looks like they started filing it smooth then got bored.

 

[Lister1987]

Would have been quicker to go and buy 2 holesaws than do this!
View attachment 55503

......the ---- is it? Eco 7 type thing?

 

[freddo]

It's Sangamo timer under some home made cover. I've no idea what it controls. When I go back to disconnect it I'll find out.

 

[telectrix]

i thought it was Ford's answer to :

Ford Custom and Ford Transit (MK8) hole in the side load door new attack trends

The Ford security software update (along with many vans now having higher security driver's door barrels) has meant that thieves are less likely to be able to unlock the load area of the Ford Custom van or Ford Transit van by twisting or attacking the driver's door lock. This is good news for...

www.sussexinstallations.co.uk

 

[lozarus]

Light fittings date stamped 1996. Assuming due to the yellow flex a builder of some description has moved the lamp, sacrificing some of their 110v extension leads to relocate the light. Odd when both be light and the klik rose are quite clearly rewire able.

 

[FarmersFriend]

Some nice 12v rated Scotchloc connectors seem to be fine for lighting circuits ?

 

[Greatwhiteshark]

Right ... Just been nudged to set this up by Paul.M and sounds a good idea following recent threads I've done in the Arms..

Rules....No Offensive material... edit if required before posting as this is the public arena.
Anything to do with the trade or in and around it ...H&S pic's welcome.

View attachment 28495

I've posted this a few times and this is at a mates house following a kitchen refirb several yrs ago. mg_smile:

View attachment 28495

Looks like some pubs..