Discuss Does anyone understand this in the UK Electrical Forum area at ElectriciansForums.net
Bit odd this, back ground is that the off peak doesn't seem to be working...
Interestingly the display didn't change the whole time we were looking at it, and despite turning on a number of panel heaters that didn't do anything either:
![[ElectriciansForums.net] Does anyone understand this](https://electricians.s3.eu-west-1.amazonaws.com/data/attachments/9/9344-76816a8f15376c43a2b20e1d91a5cef5.jpg "[ElectriciansForums.net] Does anyone understand this")
The reading on the meter display is:
r 0.00 1/1 COrr
Any idea if this what this means.
Open to verbal abuse!
The manual is here:
http://primeters.co.uk/resources/9600-3006-2+D+Sprint+Industrial+Manual+A4.pdf
You need to press the right hand button (the one that's not locked off) to cycle the display.
However, it seems to be made in several variants and I can't see the exact display shown, so a bit of experimentation may be required. Maybe it's broken!
I don't think that this meter will control the off peak supply, just meter it. I'm sure someone will correct me if I'm wrong.
Reply to Does anyone understand this in the UK Electrical Forum area at ElectriciansForums.net
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
Good to know thanks, one can never have enough places to source parts from!
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Part III:). I think I have clarity-having spoken to my electrician who installed my heaters, he said that the part of my fuseboard that is...
It sounds like the original meter was reading incorrectly and octopus aren't keen to admit this as they would probably have to refund you.
I...
