Electricians Tips from a professional electrician

[littlespark]

Electricians Tips from a professional electrician in the UK Electrical Forum

Sometimes you need to work in an old house, and there’s a number of threads on here about how to, say, fit downlights in a lathe ceiling.....

Here’s a start... on lathe and plaster walls without making a huge mess....

Mark where you want the socket to go. Height wise, measure an existing one from either the floor or the top of the skirting.


Next, use a pad saw to find a gap between the lathes. Hit and miss jabbing with the saw until it breaks through.

I will be using a regular dry lining box, so you don’t want to be too close to a vertical joist. Use the pad saw to feel to the left and right. If you can feel a joist, just adjust your planned position.

Once you have the final position, you can draw around a regular metal back box to give your cutout size.

Using a multi tool on a fairly slow speed, you can chip away at the plaster, but not the lathe quite yet.
yet.

Now, with the multi tool on a high speed and a fine toothed wood blade, you can cut neatly through the lathe without much problem. A small wood screw screwed into the middle of the lathe and held tight in pliers will help as the lathe will want to push into the hollow wall.

Now for the biggest tip I can give. Very very important whenever you are doing anything like this;



Always remember to charge your phone fully, or it will die when you’re in the middle of trying to make a hints and tips thread???

 

[Mike Johnson]

"Hoover" was/is one of the original manufacturers of the vacuum cleaner, it became a generic term as they had the largest presence on the domestic market, quite obviously a young man not know that. ?

 

[littlespark]

"Hoover" was/is one of the original manufacturers of the vacuum cleaner, it became a generic term as they had the largest presence on the domestic market, quite obviously a young man not know that. ?

47 in a couple of weeks, so if that’s young, I’ll take it!
I remember my gran having a “carpet sweeper” before any vacuum cleaner, and a black and white telly that needed “tuned in” with a dial just to choose between the 3 channels at the time.

 

[casperLennon]

Definitely a Henry vacuum cleaner

 

[nicebutdim]

"Hoover" was/is one of the original manufacturers of the vacuum cleaner, it became a generic term

Hence my comment...

 

[Mike Johnson]

It's a specific brand of vacuum cleaner or a hoover. It may be either or both (although not in the case of Henry) ?

Hoover is a specific brand of vacuum cleaner can't be both, your post is very confused. The Henry is made by Numatic.

 

[casperLennon]

I think we all know what I meant. And I’m sure most people refer to a vacuum cleaner as a hoover

 

[brianmoooore]

dysons are crap anyway. over priced and practically unserviceable.

There's definitely a knack to dismantling them, but once you know how, they come apart easily and quickly.
Bonus is that nearly all the screws are identical, so no remembering what screw goes where, and just one screwdriver needed.

my last experience with dyson was the thing had stopped altogether due to worn carbon brushes in the motor. i contacted dyson direct, requesting a set of brushes. " sorry, sir, we can't supply brushes, but we can sell you a motor, £90 +VAT". ended up buying brushes off ebay, £2.50 free delivery.

they'd not worn out. 1 brush was fine. the other one was stuck in it's holder and had arced to the comm. and burnt down.

I've bought about a dozen DC32s in various condition to keep my collection of four working ones alive, so have seen a few failed Dyson motors. The commutators are invariably burnt up and the brushes badly damaged. I've always assumed that the windings had developed shorted turns, and the excess current had done the visible damage, but I wonder now if the initial problem is a stuck brush.
Pattern DC32 motors are about half the price of a genuine one, and probably just as reliable (or unreliable).
I actually have a genuine DC32 motor in stock, but a 120 volt one. I ordered a motor for the hydraulic pump in my cherry picker from the USA last year, but was accidently sent the wrong one, which turned out to be the Dyson motor. It would have cost more in carriage to return it than it was worth, so the supplier told me to just bin it, and then sent me the motor I'd ordered.

 

[littlespark]

Sorry, I can’t resist.....


I’m selling my Hoover. It just sits collecting dust!

 

[nicebutdim]

Hoover is a specific brand of vacuum cleaner can't be both, your post is very confused. The Henry is made by Numatic.

Okay, Mike.

I'm honestly not interested in having an argument about vacuum cleaners or the widely known facts about misuse of a brand name.

I apologise if my comment wasn't clear enough, but it was intended to be taken in the context of preceding posts.

 

[loz2754]

I'm not getting sucked into this.......

 

[telectrix]

I'm not getting sucked into this.......

that comment belongs in the bag.

 

[Mike Johnson]

Can't we filter out all this debris.

 

[telectrix]

Can't we filter out all this debris.

try a dyson or a henry. ?

 

[Mike Johnson]

I don't have a Henry, mine is a 110v George. ?

 

[Intoelectrics]

I'm surprised the discrimination police haven't jumped all over this with pink Hetty's and red Henry's. I sat on a training course the other day for diversity, discrimination and inclusion. Apparently I'm no longer allowed to compliment a person on their appearance.
So next time my missus puts on a new outfit and gets her hair done etc.. and she asks "how do I look" my answer will be - "no comment".
Oh, and I shouldn't have used the term "my missus" as this implies I am implying she is a possession and not equal.