Emergency light area coverage

[Fazz711]

Hi all.
I work in a factory and do the regular EML light test.
The factory has had some extra racking installed.
This now covers some of the emergency twin spots.
I know where I can move some of them to better cover the area and have discussed additional ones to also cover the area better.
What I don't know is what regulations say about covarage.
Can some one point me to a thread on this site that gives an idea. (I have done a search but not found one)
Or a link to somewhere I can find the info.
Thanks in advance

 

[Dabbers]

BS 5266 part 1 is the regulations

https://www.tlc-direct.co.uk/Technical/DataSheets/EmergencyLighting/Risk.pdf

 

[Fazz711]

BS 5266 part 1 is the regulations

https://www.tlc-direct.co.uk/Technical/DataSheets/EmergencyLighting/Risk.pdf

Thanks for the quick reply.
I will study them at work later.

 

[James]

BS 5266 part 1 is the regulations

https://www.tlc-direct.co.uk/Technical/DataSheets/EmergencyLighting/Risk.pdf

That is a really useful resource. thanks @Dabbers

 

[Fazz711]

Thanks for that.
Very good info.
Not going to be able to do the calculations tonight.
Way to busy lol.
Will leave for the gaffer to wade though tomorrow.
Thanks again very useful