Extension socket exploded, problem with extension block or main wiring? | on ElectriciansForums

Discuss Extension socket exploded, problem with extension block or main wiring? in the UK Electrical Forum area at ElectriciansForums.net

Joined
Dec 29, 2020
Messages
2
Reaction score
0
Location
United Kingdom
I have a 4 socket extension block plugged in, in my bedroom. Just plugged genuine iPhone charger into it and instantly loud bang and the socket + charger burnt out. Although no damage at the wall socket. I assume this is just a problem with the extension and not the wall / main wiring? Just need to clarify as I know nothing about electrics.

Thanks :)
 

Attachments

  • [ElectriciansForums.net] Extension socket exploded, problem with extension block or main wiring?
    image.jpg
    756.8 KB · Views: 509
I have a 4 socket extension block plugged in, in my bedroom. Just plugged genuine iPhone charger into it and instantly loud bang and the socket + charger burnt out. Although no damage at the wall socket. I assume this is just a problem with the extension and not the wall / main wiring? Just need to clarify as I know nothing about electrics.

Thanks :)
PROBABLEY A FAULTY PLUG ON THE CHARGER
 
I'm not convinced that's a genuine Apple charger. Although I haven't seen inside the Apple product, the picture shows some construction methods that I don't think Apple would use, and lacks design features that I would expect to have seen.

There are many well-disguised replicas that require some knowledge of the design to tell apart. Unless you purchased it yourself with a genuine Apple product from a genuine Apple store, I would say that is the most likely scenario; imitation charger of faulty design / construction has gone bang. There's no reason to think there is anything wrong with your wiring, although it would be wise to replace the extension cable as the carbon deposits might impair the safety.

If it is indeed a fake charger, this is one of the best outcomes, because now you can buy a genuine one and be safe. Less favourable scenarios include spitting 230V AC power out of the USB socket and frying your phone, or even frying you when you touch the cable, or setting fire to things.
 
I replaced socketswith ones that contained a USB charger built in. You have to watch what connection is needed (lightning or USB).it saves a socket!

depending on what else is on the extension lead, I fit a surge protection extension which better protects the equipment- though would not have helped in this case.
 
I replaced socketswith ones that contained a USB charger built in. You have to watch what connection is needed (lightning or USB).it saves a socket!

depending on what else is on the extension lead, I fit a surge protection extension which better protects the equipment- though would not have helped in this case.
Not a huge fan of these things. I do not think having something built into the wall that you cannot quickly disconnect in the event of a fault is a good idea.
They make testing a pain and the build quality of some of these leaves something to be desired as this video posted by Bigclive will show.
 
Not a huge fan of these things. I do not think having something built into the wall that you cannot quickly disconnect in the event of a fault is a good idea.
They make testing a pain and the build quality of some of these leaves something to be desired as this video posted by Bigclive will show.

Fair point about the cheap crappy ones. The MK ones seem OK though - so far.
 
Fair point about the cheap crappy ones. The MK ones seem OK though - so far.
I’ve got three different ones installed(both the new Apple and the old apples ( we have 3 iPads and 3 iPhones in the house) all working ok. I agree that checking the wiring causes them to be disconnected which is a bind.
The main advantage was the removal of adapters and /or additional sockets
 
I only fit the MK usb sockets, they keep changing the bloody text on the front mind you which is annoying.

I fit loads of the logic plus range and you have to be careful as the L and N are the opposite way around to the standard sockets. Ok I have never terminated one wrong but have come close due to complacency......
 

Reply to Extension socket exploded, problem with extension block or main wiring? in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
438
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
1K
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

  • Question
Good point, they do look a bit 6mm-ish when you mention it, and that is not going to last long enough for a D63 to trip! It might, on a good day...
Replies
7
Views
1K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top