External junction boxes

[cliffed]

Quite like these,for various connections,hate the connectors inside though.
Wondering would you use compression glands on entry for flexes or pierce through the sealing membrane../neoprene to seal/hold the cable.

 

[Andy78]

I always use compression glands with them. I never like to depend on external clipping for strain relief.

You can buy them empty without connectors but most suppliers seem to stock the ones with the mountable connector strip.

 

[Ian1981]

Wiska boxes I’ve bought recently come with wago connectors

 

[cliffed]

Thanks,wagos the way forward

 

[bill01803]

I have found several of these with the cable going in without a gland and the neoprene bit has rotted out.

 

[Toneyz]

I always use compression glands with them. I never like to depend on external clipping for strain relief.

You can buy them empty without connectors but most suppliers seem to stock the ones with the mountable connector strip.

Same here Andy we usually get them supplied empty though if you are installing an SWA into them you need the earth attachment as you can not use them with a earthnut as the thread is not long enough.

 

[telectrix]

use flex glands every time. screwing the gland in breaks the neoprene seal, without you needing to cut it away first. with SWA, you can use banjos on the outside.

 

[Ian1981]

use flex glands every time. screwing the gland in breaks the neoprene seal, without you needing to cut it away first. with SWA, you can use banjos on the outside.

I’d personally never use a banjo outside the enclosure if the enclosure is located outside open to the elements
Long live earthing nuts..

 

[cliffed]

Agree they are ideal for Swa connections,I’ve seen a lot without using compression glands,& seems ok.
Impossible to get the nuts on In those boxes,so banjos are external.

 

[westward10]

Earthing nuts do not fit them you are supposed to use these neater than lashing a banjo on the outside.

 

[Sparky Pat]

I use Wiska boxes quite a bit but when using with armoured cable I tend to go for the Newlec version and use everything nuts.

 

[cliffed]

Ok,the Swa gland thread does not reach the inside of the box,can’t see the problem lashing the banjo to the outside.

 

[westward10]

Ok,the Swa gland thread does not reach the inside of the box,can’t see the problem lashing the banjo to the outside.

Well there are two ways of doing it, lash or use proprietary parts.

 

[Dustydazzler]

Only ever just use the neoprene for international like in a garage or shed.
Outside gland every time

 

[Andy78]

Only ever just use the neoprene for international like in a garage or shed.
Outside gland every time

Volt drop on an international shed supply must be horrendous.