Fault on ring circuit (weird) | on ElectriciansForums

Discuss Fault on ring circuit (weird) in the UK Electrical Forum area at ElectriciansForums.net

Joined
Feb 11, 2018
Messages
169
Reaction score
30
Location
scotland
Hi there was called to a job with fault finding on a ring 120v on one socket 190 on the other the guy had been doing some work in the kitchen by removing a socket and joint it straight through now it leaves the board as a radial so I had taken one socket of getting voltage on the earth and when I isolated the circuit one of the neutral was live and the rcd hasent tripped either weird one
 
So is it a ring or a radial???

First port of call would be where someone has been recently working, if it’s a recent fault.
Could be loose cable, faulty socket… anything.
Guy done his own downlights and put screws through lots of cables joined them himself then tiled the floor upstairs so I can’t get access to the joints plus leaking radiator which he had a shock off he’s loves diy but iam not sure it’s for him
 
Guy done his own downlights and put screws through lots of cables joined them himself then tiled the floor upstairs so I can’t get access to the joints plus leaking radiator which he had a shock off he’s loves diy but iam not sure it’s for him

Looks like it's time for some big holes in the ceiling and replacing all this guy's wiring.
 

Reply to Fault on ring circuit (weird) in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
267
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
762
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
754

Similar threads

  • Question
They ought to be able to check for the voltage going completely off using one MCB off at a time to confirm that. That would be my assumption...
Replies
9
Views
853
Seen this where T&E has been fixed with a flat bend of too tight a radius.
2 3
Replies
35
Views
1K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top