Fuse box memera 2000 AD

[ssn1122]

Does anyone know if the Memera 2000AD fuse box is now obsolete . MY EICR report says there is no RCD protection to 3 circuits so I need to replace it as it is obsolete . .

If have to replace this can some recommend a suitable one please which I can pick up from a local DIY place

Do these have to be metal clad and what what does SPD mean

Image of the one I have attached

Thanks

 

[MJPD29]

Any


Thanks ...i am.looking at the axiom metal.17th edition fuse boxes on toolstation ..are these any good ?

No
They are rubbish

 

[brianmoooore]

Axiom Metal High Integrity Dual RCD + 10 MCBs Consumer Unit

Use this Axiom consumer unit to power all the electrical circuits in your home. The distribution board provides full circuit protection and is easy for an electrician to install. You don't need to worry about this product posing a safety hazard, as its metal housing is non-combustible so will...

www.toolstation.com

Unless used where the upstream fuse is 60A (Most supplies are 80A or 100A), this can't even be fitted to meet the current regs as shown.

 

[nicebutdim]

It seems to me that the 'OP' is intent on changing this CU himself regardless of advice given and the legalities. So further advice may be ill advised...

This thread has disaster written all over it.

 

[ssn1122]

Axiom Metal High Integrity Dual RCD + 10 MCBs Consumer Unit

Use this Axiom consumer unit to power all the electrical circuits in your home. The distribution board provides full circuit protection and is easy for an electrician to install. You don't need to worry about this product posing a safety hazard, as its metal housing is non-combustible so will...

www.toolstation.com

Unless used where the upstream fuse is 60A (Most supplies are 80A or 100A), this can't even be fitted to meet the current regs as shown.

ok thank you...just saw it on the website . The electrician mentioned he will be installing one with 3 RCD's from fuse box if he were to change it .

 

[timhoward]

ok thank you...just saw it on the website . The electrician mentioned he will be installing one with 3 RCD's from fuse box if he were to change it .

Fusebox = very decent brand. Nothing wrong with dual-RCD board.
Consider paying extra for an all RCBO board, worth it in long run so faults are limited to one circuit.

 

[ssn1122]

Fusebox = very decent brand. Nothing wrong with dual-RCD board.
Consider paying extra for an all RCBO board, worth it in long run so faults are limited to one circuit.

ok thank you