fusion essential led g9 Anyone? | on ElectriciansForums

Discuss fusion essential led g9 Anyone? in the Lighting Forum area at ElectriciansForums.net

Julie.

Broke Internet
Arms
Joined
Nov 30, 2019
Messages
2,118
Reaction score
5,487
Location
Scotland
Has anyone experience of the fusion essential led g9 available from CEF ?

They are considerably cheaper than Philips, or Osram but not so much like the "unknown" brands touted about the Internet sales.
 
Specifically G9?

I’ve used a great number of their “fusion” range in GU10, and good old bayonet cap variety’s without an issue.
 
Yeah, in particular the G9, there is a bit of an issue with Philips, and Osram (and many others) due to the small size and overheating.

So I am looking for something that's ok in g9.

Lots of luminaires all with G9's - looking for a suitable lamp for all of them as standard.
 
I've fitted quite a few LAP G9 lamps. Way I see it is the big brands aren't particularly reliable where G9s are concerned, so why not fit the cheapest? Turns out they aren't too bad and I've seen very few failures over the last couple of years.
 
I've fitted quite a few LAP G9 lamps. Way I see it is the big brands aren't particularly reliable where G9s are concerned, so why not fit the cheapest? Turns out they aren't too bad and I've seen very few failures over the last couple of years.


Thanks, yeah strangely enough I found the cheap "Dial" G9s from B&Q/tradepoint to be better than the big names, but they appear to have dropped them in favour of jacobsen, which again I have little knowledge about their reliability in G9
 
Think I've seen one fail after a reasonable period of time and one fail within a few hour's use. I can live with that average considering a pack of five costs about the same as one brand name lamp.


Edit: Just looked at the Screwfix website and they're no longer sold in packs of five - pack of two costs slightly less than five had previously.
 
Yeah 20 lamps is circ

ÂŁ92 for LAP
ÂŁ85 for Jacobsen
ÂŁ105 for fusion essential
ÂŁ 140 for Philips
...

Big differences, but completely unknown difference in reliability.

G9s have such a problem with reliability it's difficult to decide what's best
 

Reply to fusion essential led g9 Anyone? in the Lighting Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
706
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
1K
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
3K

Similar threads

Thanks for you response, that makes more sense LEDs do produce less heat. I think i read somewhere that LEDs are more sensitive to heat, as in...
Replies
2
Views
887
Switch by the door, pendant holder and a 100W bulb, some will remember, others weren't born yet when it went out of fashion, but this was the...
    • Like
Replies
0
Views
353

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top