fusion essential led g9 Anyone? | on ElectriciansForums

Discuss fusion essential led g9 Anyone? in the Lighting Forum area at ElectriciansForums.net

Julie.

Broke Internet
Arms
Joined
Nov 30, 2019
Messages
2,118
Reaction score
4,826
Location
Scotland
Has anyone experience of the fusion essential led g9 available from CEF ?

They are considerably cheaper than Philips, or Osram but not so much like the "unknown" brands touted about the Internet sales.
 
Yeah, in particular the G9, there is a bit of an issue with Philips, and Osram (and many others) due to the small size and overheating.

So I am looking for something that's ok in g9.

Lots of luminaires all with G9's - looking for a suitable lamp for all of them as standard.
 
I've fitted quite a few LAP G9 lamps. Way I see it is the big brands aren't particularly reliable where G9s are concerned, so why not fit the cheapest? Turns out they aren't too bad and I've seen very few failures over the last couple of years.
 
I've fitted quite a few LAP G9 lamps. Way I see it is the big brands aren't particularly reliable where G9s are concerned, so why not fit the cheapest? Turns out they aren't too bad and I've seen very few failures over the last couple of years.


Thanks, yeah strangely enough I found the cheap "Dial" G9s from B&Q/tradepoint to be better than the big names, but they appear to have dropped them in favour of jacobsen, which again I have little knowledge about their reliability in G9
 
Think I've seen one fail after a reasonable period of time and one fail within a few hour's use. I can live with that average considering a pack of five costs about the same as one brand name lamp.


Edit: Just looked at the Screwfix website and they're no longer sold in packs of five - pack of two costs slightly less than five had previously.
 
Yeah 20 lamps is circ

£92 for LAP
£85 for Jacobsen
£105 for fusion essential
£ 140 for Philips
...

Big differences, but completely unknown difference in reliability.

G9s have such a problem with reliability it's difficult to decide what's best
 

Reply to fusion essential led g9 Anyone? in the Lighting Forum area at ElectriciansForums.net

Similar threads

Thanks for you response, that makes more sense LEDs do produce less heat. I think i read somewhere that LEDs are more sensitive to heat, as in...
Replies
2
Views
796
Switch by the door, pendant holder and a 100W bulb, some will remember, others weren't born yet when it went out of fashion, but this was the...
    • Like
Replies
0
Views
256

Recommended Sponsor News

  • Article
thanks for the clarification. ( also thanks to Dan. ).
Replies
6
Views
2K
  • Article
More info on link below http://sbsc.uk.net/
    • Like
2
Replies
22
Views
9K
  • Article
Happy Friday Everyone! Subscribe for more jokes direct to your mailbox or send us your own jokes to be in with a chance of featuring, by clicking...
    • Like
2
Replies
27
Views
6K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top