Good Old Delroy, he gets all the best Jobs :)

[Dustydazzler]

 

[mainline]

Both Cjr and Delroy delete and stop any bad comments showing on their pages.
I have commented many times, and it's only me that can see the posts.
Cjr is the shortest but has the biggest ego there are many jobs that must have cost the customer a fortune in materials.
There are many bad jobs /errors made by both of them, in fact Cjr isn't covered by niceic to do eicrs.

After just watching a Nagy YouTube video of him working on a split load Board, tracing a tripping fault.
Very painful to watch.
Also, another one that doesn't allow any negative comments.
He went on quite a bit about rcbo's but failed to mention that they would need to be DP rcbo's to really be of any benefit in an earth to neutral fault.

 

[Petej999]

After just watching a Nagy YouTube video of him working on a split load Board, tracing a tripping fault.
Very painful to watch.
Also, another one that doesn't allow any negative comments.
He went on quite a bit about rcbo's but failed to mention that they would need to be DP rcbo's to really be of any benefit in an earth to neutral fault.

Don't like being told the truth do they?

 

[Dustydazzler]

Never watch Chris aka CJ the Plumberman anymore as he was so stuck up he got plain boring

Nagy tends to ramble on quite a lot but within the waffle he makes some decent valid points

Delroy I Iike as he just shows the jobs with a brief talk about what he is doing and why and throws in the odd back story about his time as a sparks in the 60s and 70s which i find quite interesting

Bundy I watch from time to time , seems a nice genuine lad

 

[mainline]

Never watch Chris aka CJ the Plumberman anymore as he was so stuck up he got plain boring

Nagy tends to ramble on quite a lot but within the waffle he makes some decent valid points

Delroy I Iike as he just shows the jobs with a brief talk about what he is doing and why and throws in the odd back story about his time as a sparks in the 60s and 70s which i find quite interesting

Bundy I watch from time to time , seems a nice genuine lad

Delroy i quite like but makes so many mistakes it's quite laughable and at times dangerous.
Nagy i watched for a while until I saw some of his fault-finding skills or should I say lack of and giving a C2 because they didn't have RCD when the installation was pre is out of order.
Cjr one word for him starts with a W and ends with an R.

 

[Lister1987]

Anyone else see Del's latest? How thr ---- does he not see it's a fused line and neutral cutout and not, as he reports it to be a fuse for the flat he's in and upstairs....Hoe hashe not come across one in his many years?....Oh my days (Bet you read that in his voice?) anyone want to throw a MOCOPA guide at him to help him out?

 

[mainline]

Anyone else see Del's latest? How thr ---- does he not see it's a fused line and neutral cutout and not, as he reports it to be a fuse for the flat he's in and upstairs....Hoe hashe not come across one in his many years?....Oh my days (Bet you read that in his voice?) anyone want to throw a MOCOPA guide at him to help him out?

Just saw cjr s latest where instead of using swa he decided to run 5 mtrs of tails you can see they arent more than 50mm deep so require rcd and where they run down the wall hes put a plate over them for protection with no bonding.

 

[goasis]

Just saw cjr s latest where instead of using swa he decided to run 5 mtrs of tails you can see they arent more than 50mm deep so require rcd and where they run down the wall hes put a plate over them for protection with no bonding.

Maybe racking up YouTube views is more important....

 

[Dustydazzler]

Because he is a plumber and that is what plumbers do...

 

[MJPD29]

Cjrs knowledge is extremely poor he is more of a DIYer from what I can see. He tries so hard to please everyone but from what ican see he takes far too long on each job doing pointless things and deletes any critical comments. A lot of the stuff he does screams incompetence

 

[timhoward]

Anyone else see Del's latest? How thr ---- does he not see it's a fused line and neutral cutout and not, as he reports it to be a fuse for the flat he's in and upstairs....Hoe hashe not come across one in his many years?....Oh my days (Bet you read that in his voice?) anyone want to throw a MOCOPA guide at him to help him out?

You are referring to this?

 

[Dustydazzler]

Latest install from Del , he is rewiring what another electrician recently rewired

 

[littlespark]

he takes far too long on each job

……filming himself, and possibly having several takes before he gets it “right”

Surely these videos that show the wrong way to do things being taken as the right way… it’s “fake news” and should be called out.

 

[Mikegh]

I think Delroy must have gone on a refresher course he's looking semi-competent lately

He's still generally clueless but improving

 

[Petej999]

Just saw cjr s latest where instead of using swa he decided to run 5 mtrs of tails you can see they arent more than 50mm deep so require rcd and where they run down the wall hes put a plate over them for protection with no bonding.

Yes quite enlightening isn't he

 

[mainline]

I think Delroy must have gone on a refresher course he's looking semi-competent lately

He's still generally clueless but improving

I heard there's a shortage of weed in London