HELP!, Kitchen downlights | on ElectriciansForums

Discuss HELP!, Kitchen downlights in the Australia area at ElectriciansForums.net

C

Clint Furnish

Hi, I have noticed that the lights in my kitchen have been cutting out recently so have decided to check it out.

When I took one of the lights out I noticed that the box above had been burnt and the wires are damaged,.

Does anybody know what may cause this and how I can fix it?

any help will be appreciated.

341198_10150324081325116_551230115_7805026_103731339_o.jpg
 
It means that the fixtures are producing too much heat for how they are installed and COULD CAUSE A FIRE. Get a qualified electrician to inspect them all straight away.
 
Hi Clint, welcome to the forum. As the others have said you need a qualified electrician to thoroughly test and investigate the cause, also to check all the other down-lighters and their terminations. They will then be in a position to carry out the required remedial work. If you post your location, I'm sure one of the members in your area will be able to help.
 
Last edited by a moderator:
as above posts. heat from lamps has caused this. i always use heat resistant flex for the connection to the fitting and ensure that there is no insulation or flammable material near the fittings. as advised, you need a sparks to come and check and rectify all fittings. cost should not be much more than a call-out and around 1 hour's time. ( with a few quids worth of materials.) .
 
this is a big problem with down lighters , im in agree ment with all the above comments ,i have come across this on loads of occasions and the one main factor is the quality the fittings where the terminal enclosure just falls off as your has done and probabley when the light has been pushed into place when installed , this is the reason why i now install LED or CFL down lighters ,as the other have said get a spark in to check it out as others may well be effected , if you require new down lighters have a look at the click scolmore ones ,
 

Reply to HELP!, Kitchen downlights in the Australia area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Hi everyone, If you are looking for reliable EV chargers, check out our top-rated selection at E2GO! ⚡ Please note that all EV Chargers and...
Replies
0
Views
152
  • Article
As the holiday season approaches, PCBWay is thrilled to announce their Christmas & New Year Promotions! Whether you’re an engineer or an...
Replies
0
Views
962
  • Article
Bloody Hell! Wishing you a speedy recovery and hope (if) anyone else involved is ok. Ivan
    • Friendly
    • Like
Replies
13
Views
1K

Similar threads

And metal backboxes partly full of pink plaster smacks of lazy DIYers, or equally lazy professional sparkies.
Replies
5
Views
331
  • Question
  • camperVanGuy101
  • Australia
  • 2
  • 881
Replies
2
Views
881

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top