How Did we cope back in the Day

[cliffed]

1992 BS7671 16th Edition who remembers doing Supplementary Bonding to everything in Bathrooms..
How did we connect the 4mm in the fittings

 

[buzzlightyear]

1992 BS7671 16th Edition who remembers doing Supplementary Bonding to everything in Bathrooms..
How did we connect the 4mm in the fittings

with a hammer ,we meet again Mr bond.

 

[Moley]

Every time I go into our workshop toilet I look at the pipework. Copper pipe going to a plastic valve and then a 6" length of copper pipe coming from the valve to the plastic tank. Each side of the plastic valve is the earth strap with a short length of earth cable 'earthing' the otherwise totally disconnected 6" piece of copper pipe. Ah, the good old days.

 

[Jock from the north]

In 2017 aberdeen city Council were still insisting on bonding kitchen pipes and sink ,a real pain in the arse as you had to get the apprentice to fit a rad clamp to sink before it was fitted other wise it was a faf.also bathroom rads and pipe work and steel bath all while running in main bonding conductors and rcbos.that was the relaxed rules before it was a 4 mm from light switch to shower to pipes etc .