How to add a bigger Back Box | Page 2 | on ElectriciansForums

Discuss How to add a bigger Back Box in the UK Electrical Forum area at ElectriciansForums.net

L

Lordy9099

Hello All,

Happy New Year! Anyway I have just bought a 2 way LightwaveRF dimmer switch, it is suppost to be used with a 35mm back box but the one installed is currently only 16mm and no way can I get it to fit, so my main question is how can I make the current 16mm hole into a 35mm hole without making a big mess. Also how do you make a cable bigger if it is getting a little too short, Choc block?

Thanks
 
You can get collars from B&Q and the like, that go between the back box and the accessory.
These allow the extra space required when the back box is too shallow.
If your cables are too short, yes use a terminal block to extend them.
 
Get a ELECTRICIAN to do it instead of somebody f&ckin competant. I HATE that word competant and all its b&ll&cks definitions.

competent [ˈkɒmpɪtənt]adj
1.
having sufficient skill, knowledge, etc.; capable
2. suitable or sufficient for the purpose a competent answer
3. (Law) Law (of a witness) having legal capacity; qualified to testify, etc.
4. (postpositive; foll by to) belonging as a right; appropriate[from Latin competēns, from competere to be competent; see compete]

:laugh:
 

Reply to How to add a bigger Back Box in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
298
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
807
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
848

Similar threads

  • Question
The last couple of de-loops that I have been involved with had the single phase supply replaced with a three phase cutout (as I believe the DNOs...
Replies
5
Views
982
An example of the long term race to the bottom of quality of work in our industry, IMHO.
Replies
7
Views
656

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top