HSS Drills any one know good quality make

[the pict]

I am about 3/4 the way through a trailer build all stick welded, and now I am attaching lash points etc I bought a well known diy brand but got 2 x 8mm holes and its knackered I know I can be a bit heavy handed at times but come on 2 holes, so I am looking for what my Granddad used to call blacksmith standard they were bloody dear back in the day so heaven knows what they will be now but advice is welcome
Pict

 

[Strima]

Any decent brand will do, not Erbauer or Titan etc.

A good drill speed, not too fast with a decent amount of pressure and most importantly some lube on the bit. Keep it cool and just munch your way through.

Combi drill on a slow speed setting works well, if it starts squealing it's got hot and is too late.

 

[the pict]

I am just a ham fisted hammer jockey at times thanks for the reminder about taking the time to take my time

 

[Andy78]

Presto HSS jobbers are worth a try for a durable bit.

 

[rsgaz]

Cobalt bits are the best IMHO.
And get "split point" bits if you are not drilling a pilot hole first.

Anyway, you have welding equipment, a workshop/garage I assume, and yet, you don't have one of these?...

https://4.imimg.com/data4/PU/XN/ETO-3847996/bench-grinder-----flexible-shaft-grinder-500x500.jpg

 

[the pict]

I have a grinder but I have never mastered the art of sharpening bits

 

[multimick]

when i worked at british aerospace we used cobalt drills on titanium,no problem,,but now back down to earth bosch bits aare pretty good

 

[static zap]

I have a grinder but I have never mastered the art of sharpening bits

Nothing like practice ..if you fancy going for a wander !
(I cheat and demmel them thinner at flutes)
... where you have welded may have hardened a bit ..

 

[telectrix]

sod cheap cobalt bits. the cobalt is only a couple of microns and they wear out faster than a tart drops her knickers. this is the sort of thing you need.not cheap though.
Dormer HSS-Tin 1mm to 13mm, 25 piece Jobber Drill Set | A095204 | RS Components - https://uk.rs-online.com/web/p/products/7947666/?grossPrice=Y&cm_mmc=UK-PLA-DS3A-_-google-_-PLA_UK_EN_Tools-_-Power_Tool_Accessories_And_Drill_Bits%7CDrill_Bit_Sets-_-PRODUCT+GROUP&matchtype=&gclid=CjwKCAjwhLHaBRAGEiwAHCgG3rKsu-vV4_zqup3Ul1TC5aMaZZbif3oITOS8EjYpu1L4yKA6yLnU3hoCFYkQAvD_BwE&gclsrc=aw.ds

 

[rsgaz]

the cobalt is only a couple of microns

Cobalt bits are not 'cobalt plated'. The cobalt is mixed into the metal. (8% for HSS-Co drill bits)

 

[telectrix]

not with that crap i bought off ebay. 1 hole and knackerd.

 

[Andy78]

For cheap cobalt bits, I find the toolstation ones pretty good.

 

[multimick]

i used to drill titanium 10 mm thick with a 14mm cobalt drill,no pilot hole , no problem, air drill

 

[mattg4321]

Go slow and use lube.

This applies to things other than the topic of this thread

 

[telectrix]

Go slow and use lube.

This applies to things other than the topic of this thread

regarding your things other..... down in the SE you probably use KY.up here in the barbarian North we use axle grease.