i dont have 2391 | on ElectriciansForums

Discuss i dont have 2391 in the Australia area at ElectriciansForums.net

T

tonyg

hi there just wondering if anyone can help me with this i dont have 2391 but i was testing through my now ex-employer! are elecsa my only option ive read they dont require 2391 aslong as your competent ! ive just wired an extension where the council sent there electrician at 1st fix and sending out again to check test results when finished i dont mind doing it this way but just thinking easier for future
 
hi there just wondering if anyone can help me with this i dont have 2391 but i was testing through my now ex-employer! are elecsa my only option ive read they dont require 2391 aslong as your competent ! ive just wired an extension where the council sent there electrician at 1st fix and sending out again to check test results when finished i dont mind doing it this way but just thinking easier for future


There are NO legal requirements to have any testing quals to do the work, you have to be competent. YOU don't even need to be a qualified spark (UNFORTUNATELY). You only have to show that you have complied with the various statures, such as EAWR.
 
Niceic don't require 2391 I've just got my approved contractor and I've not got it nor is there any time I have to get it by. Think napit want it within a year? Could be wrong tho
 
IMHO anyone who works for themselves should have the 2391........and before you all start....I know you don't have to - it's just my opinion.

Taking the course makes you a better spark - you end up with a greater understanding - and it will help prove your competence if the 'poo' hits the fan.

And you will learn something on the course - even if it's just that you've been doing it wrong all these years - like some of the '30 year sparks' who were on the course with me.

Why look for loopholes to not get it......just go and do it.:yesnod:
 
Last edited by a moderator:
What I read was the Niceic was involved with city and guilds in setting up the 2391 for their QS
It was required until the last few years, where it has now been replaced by the requirement to show competency in testing instead
There is an employment advantage with 2391,but only Napit have mention of it for entry, and then it may just be paying lip service to higher standards
 

Reply to i dont have 2391 in the Australia area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Hi everyone, If you are looking for reliable EV chargers, check out our top-rated selection at E2GO! ⚡ Please note that all EV Chargers and...
Replies
0
Views
199
  • Article
As the holiday season approaches, PCBWay is thrilled to announce their Christmas & New Year Promotions! Whether you’re an engineer or an...
Replies
0
Views
1K
  • Article
Bloody Hell! Wishing you a speedy recovery and hope (if) anyone else involved is ok. Ivan
    • Friendly
    • Like
Replies
13
Views
1K

Similar threads

  • Question
Hi there just after some advice Just done my AM2 and made a blunder on my test and inspection which I know I will fail .. however I have 2391...
Replies
0
Views
256
  • Question
Jumping on and off jobs can be tough going when you're less than confident as every time you go back it's like a new job. that you know little...
    • Like
2
Replies
15
Views
2K
nicebutdim
N

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top