I'm in trouble wrong cable for car charger | on ElectriciansForums

Discuss I'm in trouble wrong cable for car charger in the UK Electrical Forum area at ElectriciansForums.net

baazab

-
Joined
Oct 30, 2010
Messages
174
Reaction score
23
Location
uk
Doing full rewire customer asked me to run a supply for future use car charger supply

I ran 6mm 3core swa to where the car charger is going in future, yesterday I watch few videos and noticed data or ct cable !!!

Can anyone help is 6mm 3 core swa will work with out this data or ct cable ,
 
It depends entirely on the charge point being installed.

It’s only ones that require load shedding or internet access that will need extra cables, and those functions can likely work over Wi-Fi or radio frequency.

Is it going to difficult to run afterwards?
 
It depends entirely on the charge point being installed.

It’s only ones that require load shedding or internet access that will need extra cables, and those functions can likely work over Wi-Fi or radio frequency.

Is it going to difficult to run afterwards?
The extra 2 core some say ct cable is is that data cables !
Will that go back to consumer unit !
How can I mix ct or data with the rest the circuits ?


Many thanks
 
Doing full rewire customer asked me to run a supply for future use car charger supply

I ran 6mm 3core swa to where the car charger is going in future, yesterday I watch few videos and noticed data or ct cable !!!

Can anyone help is 6mm 3 core swa will work with out this data or ct cable ,

I wouldn't worry too much, unless you were provided with a spec that included data connection. If they simply asked for a cable, then plenty of charge point options out there that'll utilise wifi (provided the run isn't long enough to be out of range).
 
I had podpoint install a charger on one of my rented property through the tenants company.. they just used 6mm NYY cable with then a two core data cable in a steal wired armour and ran it along the NYY cable, I guess the wire armouring provides screening..

Would it be possible to do the same, just run another cable alongside? The cable podpoint used even fit in the cleats with the NYY cable..
 
I think most use wiFi now?
Most use WiFi for all the interactive gubbins and don't need networked. But the Cat5 in the cable can come in handy for installing the CTs if required for load management and solar control. Although some chargers do have wireless CTs.
 

Reply to I'm in trouble wrong cable for car charger in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
521
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
1K
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
2K

Similar threads

Hi My first post here, so apologies for any mistakes. I think it will be DIY job with electrician sign off if required, but would like to do as...
Replies
0
Views
225
  • Question
You need a CT clamp at main tails, it depends on the rules where you are - you used to be allowed wireliss ones (such as MyEnergi Harvi), these...
Replies
14
Views
3K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top