Is this the worst install you have ever seen? *Feedback wanted!* | Page 4 | on ElectriciansForums

Discuss Is this the worst install you have ever seen? *Feedback wanted!* in the UK Electrical Forum area at ElectriciansForums.net

Joined
Feb 2, 2010
Messages
753
Reaction score
133
Location
Sheffield
Hi everyone,

I would very much appreciate your feedback/comments regarding this electricial install to help my cousin who has been ripped off and potentially could have put her life at risk!

She has recently had new decking fitted in the back garden and a family friend of hers who I kind of know put in the electrics for the outside lighting. This kid has being doing electrics since leaving school (approx 10years) and I know the firm he served his time with and I have come accross his work before!

He has installed outside lights to the decking in 1.5mm and took the feed straight from a kitchen socket under the sink and cut the earth out. He's then run it to an outside two gang switch (to which only one gang was needed) he then took the feed out of the switch in 2.5mm and fed every metal* light fitting reducing the cable size to 1.5mm then back to 2.5mm. He has cut off every earth at every connection point terminated in connectors and left them out in the open...yes in the open! He has made so many connections in connector blocks and failed to connect the earths from the fittings.

I had to go round earlier to see for myself as I did not believe that he had done such disgusting work when my cousin told me. I have asked for her permission to put these photos up and would like some feedback off other electricians.

I have uploaded some photos to show you how bad this install is.

Thanks

[ElectriciansForums.net] Is this the worst install you have ever seen? *Feedback wanted!*
[ElectriciansForums.net] Is this the worst install you have ever seen? *Feedback wanted!*
[ElectriciansForums.net] Is this the worst install you have ever seen? *Feedback wanted!*
[ElectriciansForums.net] Is this the worst install you have ever seen? *Feedback wanted!*
[ElectriciansForums.net] Is this the worst install you have ever seen? *Feedback wanted!*
[ElectriciansForums.net] Is this the worst install you have ever seen? *Feedback wanted!*
[ElectriciansForums.net] Is this the worst install you have ever seen? *Feedback wanted!*
[ElectriciansForums.net] Is this the worst install you have ever seen? *Feedback wanted!*
[ElectriciansForums.net] Is this the worst install you have ever seen? *Feedback wanted!*
[ElectriciansForums.net] Is this the worst install you have ever seen? *Feedback wanted!*

If the photos are not clear enough you can view them by clicking below

http://profile.imageshack.us/user/rmc86uk/
 
Worst ? ..no, quite often find substandard work similar to this. Builders, kitchen fitters, diy bodgers list is endless, everyone ones a spark, after all as long as the light comes on or the socket works who cares a ----, certainly not the customer. This type of work is usually price driven or on rare occasions customer's ignorance or a rip off.

He may have 10 years experience but he is a danger to himself and the public. This country is not investing in our youth, who will be tomorrows electricians, plumbers, gas engineers and the like. I shudder to think what the level of competency to expect in 20 years time when the chickens come home to roost.
 
It's disgusting that someone would even think they could get away with that. That fat hairy leg and the blue Nike trainers nearly put me off my evening meal.
Sorry, just trying to lighten the mood:)
 
:clown:Time served? No chance, surely?

Either way, that is truly shocking. How do these clowns sleep at night?

Do you know, if I had not seen so many posts lately that were thought to be wind ups, I would honestly flag this as being one.
 
Last edited by a moderator:
Don't rip it out. Make sure it cannot be reconnected and get trading standards out, along with local building control. That goes beyond bad, and whoever did it needs to be stopped before someone is killed.
 
Don't rip it out. Make sure it cannot be reconnected and get trading standards out, along with local building control. That goes beyond bad, and whoever did it needs to be stopped before someone is killed.

I disconnected it straight away as soon as I saw it, it's going to be left in for now for evidence if it goes that far! I just can't imagine what his work looks like that is not on show!

Sent from my GT-I9300 using Tapatalk 2
 

Reply to Is this the worst install you have ever seen? *Feedback wanted!* in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
305
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
825
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
912

Similar threads

  • Question
I came across a UV steriliser tube with end caps like this while doing an EIC on a farm a few years ago. The damn thing actually bit me while I...
2
Replies
16
Views
3K
  • Question
Could you tell her you're gonna give it a quick test as she is unsure where the paperwork is? That would give you a better idea of overall...
2
Replies
16
Views
2K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top