Is too late to start . | Page 3 | on ElectriciansForums

Discuss Is too late to start . in the UK Electrical Forum area at ElectriciansForums.net

Thommo

Trainee
Joined
Sep 8, 2019
Messages
43
Reaction score
112
Location
Dartford
Hello everyone,
Just wondering your thoughts and welcome any advice.
Just been made redundant again from my original trade of printer which frankly is a dying trade. I did a 5 year apprenticeship in the early eighties which at the age of 55 now seems worthless.
In and out of the print trade over the years I regularly worked on site ceiling fixing for my uncles firm.
I worked a lot of nights on London Underground steel fixing and installing ceilings and panels over track and escalators etc.Running compartment trunking along platforms, using chem fix on threaded rod and many other things.Therefore I do have plenty of experience using tools etc and have gained certification necessary for that work on lul.
All have now expired except CSCS card.Have enquired about this kind of work, but jobs are scarce and based on who you know.
I have been offered a start as a sparks mate and doing a months trial. Obviously I am not a kid who will be on his phone all day, I have a mentality of a good days wedge for a good days graft. I would want to learn as much as possible because I wouldn’t be content just labouring.More of an elderly improver, So I will give it a go, do any of you think I am too late . Old dog new tricks and all that.
 
I Joined and started this thread 3 1/2 years ago and was very nervous and apprehensive about my future and ability to succeed in my goals.
I would like to take this opportunity to thank you all for your help and support over this time and for your words of encouragement.
Today I had my NVQ portfolio signed off and have been advised that I should take my AM2, which I have booked for early June.
Never thought I would get this far so thanks again.
 
Opened this thread and then realised it was from 2019 and though “who’s made the mistake of replying to such an old thread?”.

Nice to see it wasn’t a mistake and the original poster had come back to post again with an update and a good outcome!

Well done mate
 
I Joined and started this thread 3 1/2 years ago and was very nervous and apprehensive about my future and ability to succeed in my goals.
I would like to take this opportunity to thank you all for your help and support over this time and for your words of encouragement.
Today I had my NVQ portfolio signed off and have been advised that I should take my AM2, which I have booked for early June.
Never thought I would get this far so thanks again.
Great news Thommo.
Really pleased that you went for it mate and thanks for updating on your journey
 
Opened this thread and then realised it was from 2019 and though “who’s made the mistake of replying to such an old thread?”.

Nice to see it wasn’t a mistake and the original poster had come back to post again with an update and a good outcome!

Well done mate
Thanks mate
Appreciate the help and the encouragement I’ve had from this forum
 
Hi all,
Thought I’d update you all again, the right thing to do considering all the help I’ve had on this forum.
Received my results of my AM2 today and passed, which I am naturally over the moon with.
A very stressful week all in all to be honest, going to give myself a break now then give I&T 2391/52 a go in a couple of months.
Every day’s definitely a school day and I am enjoying the days in my new trade more than I had hoped.
Well most em anyway 🤣
Thanks again for all your help and encouragement.
 
Hi all,
Thought I’d update you all again, the right thing to do considering all the help I’ve had on this forum.
Received my results of my AM2 today and passed, which I am naturally over the moon with.
A very stressful week all in all to be honest, going to give myself a break now then give I&T 2391/52 a go in a couple of months.
Every day’s definitely a school day and I am enjoying the days in my new trade more than I had hoped.
Well most em anyway 🤣
Thanks again for all your help and encouragement.
Hi mate which NVQ did you do??
 

Reply to Is too late to start . in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
626
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
1K
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
2K

Similar threads

  • Question
Jumping on and off jobs can be tough going when you're less than confident as every time you go back it's like a new job. that you know little...
    • Like
2
Replies
15
Views
2K
nicebutdim
N
The challenge that you have with this is that you've no confirmed start point. Because you have a lack of an EICR you don't actually know what...
Replies
7
Views
668

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top