Looking for some advice please

[JurassicSpark123]

Hello everyone. I am a full qualified 17th edition electrician with about 10 years experience. I now want to set up on my own as a domestic electrician. Like i said i have nvq level 3 and 17th edition. I was just wondering is there any more qualifications or courses i need or should take? Any advice in general would be great. Thanks!

 

[telectrix]

no need. are you considering joining a scam for the part pee notifiable works fiasco?

 

[Spoon]

Welcome to the forum mate.
Are you currently employed?
Why do you want to go self employed?
Go you gave a good customer base?

 

[JurassicSpark123]

no need. are you considering joining a scam for the part pee notifiable works fiasco?

No need to do anything else? I have been reading about the part p and to be honest im confused about if i am supposed to have it or not! Some articles sound like i wouldnt be able to sign any jobs off without it?

 

[JurassicSpark123]

Welcome to the forum mate.
Are you currently employed?
Why do you want to go self employed?
Go you gave a good customer base?

I have been sub contracting the last few years. I just feel like i want to have a crack at being my own boss! I have been a commercial spark mostly so my customer base would have to be built from scratch

 

[JurassicSpark123]

Im just confused about what i legally need to set up on my own. I currently dont have my testing so would be out sourcing that to begin with

 

[telectrix]

legally, you're good to go. as for the part pee. any work in a special location ( bathroom), any new circiuts, CU changes, should be notified to building control. you have 4 options.
1. join a scam and then notification is simple and about £2.
2. pay BC around £300 to certify for you.
3.get a mate who's in a scam to oversee the work and sign it off.
4.ignore notification. prosecutions for this ( unless something goes wrong) are a staggering amount of ..... ZERO.

 

[JurassicSpark123]

Which one would you suggest?

 

[ferg]

I hate to say it but..... join a scam.

 

[Deleted member 9648]

No need to do anything else? I have been reading about the part p and to be honest im confused about if i am supposed to have it or not! Some articles sound like i wouldnt be able to sign any jobs off without it?

You cant 'have' part P. It's a building regulations document not a qualification.
You need to comply with part P if you are doing residential work. Download the part P document and read it.
Enquire with the various schemes as to entry requirements, join a scheme for an annual fat fee and this will enable you to notify to BC jobs which require notification for a very small fee per notification.
If you are not a member of a scheme you will have to part with a substantial fee for each job that requires notification or break the law.
There is some confusion over 'signing off'. Anyone can issue the appropriate certificate 'signed off' to the client. It is the legal requirement of notification to BC with certain jobs that gets tricky, the only viable way is through one of the schemes.

 

[Octopus]

Stroma - the cheapest.

Going around and relying on others to test and sign off is going to make your life more complicated AND take valuable work from you.

 

[JurassicSpark123]

Which scam would you all suggest haha

 

[paul291277]

My one, send me your credit card details and I'll set up everything for you

 

[The Ghost]

Stroma. Part P is building regs exam C&G 2392 or something close. It's a one day course. You have to test and verify any installation prior to commissioning. You have to issue a certificate for most work. If you do not join a scheme you will have to notify B.C. local authority and the client will have to pay hundreds. If you are with a CPS, they will arrange notification and the client will receive that important document as passed by B.C. saving hundreds circa £300.
So you will need CPS membership. Each one will require Qualies, differing with each. They will need insurance PL and for EICR PI. They will want to see your complaints procedure, H&S statement Risk Assessment and method statement. Also some examples of work.

 

[Deleted member 9648]

Stroma. Part P is building regs exam C&G 2392 or something close. It's a one day course. You have to test and verify any installation prior to commissioning. You have to issue a certificate for most work. If you do not join a scheme you will have to notify B.C. local authority and the client will have to pay hundreds. If you are with a CPS, they will arrange notification and the client will receive that important document as passed by B.C. saving hundreds circa £300.
So you will need CPS membership. Each one will require Qualies, differing with each. They will need insurance PL and for EICR PI. They will want to see your complaints procedure, H&S statement Risk Assessment and method statement. Also some examples of work.

I think that's very misleading and perpetuates the myth that part P is a qualification.
There is no part P qualification and anything this course 'teaches' can be had for free simply be reading the part P document.