Low voltage from live to earth, on a ring final. | on ElectriciansForums

Discuss Low voltage from live to earth, on a ring final. in the UK Electrical Forum area at ElectriciansForums.net

Why do I only get 50v from live and earth, I’m getting 240 from live to neutral. The circuit is a ring.
The earth is not connected to anything is one of the most likely (and dangerous) reasons.
Do you know what the earthing system of the property is?
A picture of the meter and its associated wiring would be really usefull.

Edit:
Also note that I can think of a couple of other ways this could happen but the most important thing about all of them is they all have the potential to be very DANGEROUS

Please get someone qualified to investigate as soon as possible.
 
Last edited:
The earth is not connected to anything is one of the most likely (and dangerous) reasons.
Do you know what the earthing system of the property is?
A picture of the meter and its associated wiring would be really usefull.

Edit:
Also note that I can think of a couple of other ways this could happen but the most important thing about all of them is they all have the potential to be very DANGEROUS

Please get someone qualified to investigate as soon as possible.
It’s a TN-C-S, its only on that circuit, the other circuits are ok
 

Reply to Low voltage from live to earth, on a ring final. in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
149
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
503
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
449

Similar threads

Joining the ends of the radials together to form a ring, and changing the circuit protection to a single 32A would solve the MCB overload problem...
Replies
8
Views
706
Found the cause of the tripping…. Just jointed them through… all clear now. Removed the smoke detectors completely. They were due to be...
Replies
6
Views
834

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top