Maximum load for shaver socket in bathroom? | on ElectriciansForums

Discuss Maximum load for shaver socket in bathroom? in the DIY Electrical Advice area at ElectriciansForums.net

linuxthefish

-
DIY
Joined
Jan 2, 2012
Messages
49
Reaction score
4
Hi, what's the maximum load I can run from a shaver socket in a bathroom? Can I run speakers in the bathroom from this point?

If that load is maximum, can I put extension cable into the bathroom and how long does it need to be away from the shower?
 
Are you looking to plug them into the shaver point or to steal power from the supply going to the shaver point? Either way I don't like the idea. Can't you run the speaker supply and wiring in the ceiling above the bathroom?
 
Shaver points are usually marked Shavers Only. Although I do run my toothbrush off mine. Not speakers though! A new one on me.
 
Just plugging speakers into it to use inside the bathroom, It's currently over the sink so that could be a bit of an issue?


http://i.Upload the image directly to the thread.com/RWxKsLy.jpg

- - - Updated - - -

Just plugging speakers into it to use inside the bathroom, It's currently over the sink so that could be a bit of an issue?
 

Attachments

  • [ElectriciansForums.net] Maximum load for shaver socket in bathroom?
    RWxKsLy.jpg
    64 KB · Views: 25
I don't think that there is any safe advice to be given here due to the special location etc etc.

Thread closed
 
I can`t make my mind up if this is a serious question or just trolling?

If it is serious all I can say to your question is that the current arrangement you currently have is certainly not acceptable. and as for running an extension lead into a bathroom???? There are good reasons why electrics plugged into extension leads and bathrooms don`t mix so in all seriousness do not run an extension lead into the bathroom.
 

Reply to Maximum load for shaver socket in bathroom? in the DIY Electrical Advice area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
303
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
819
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
896

Similar threads

Many thanks. Very clear!
Replies
2
Views
192
im just assuming that they are designed to be surrounded by material, and would heat to a certain amount, spreading the heat into the material...
Replies
4
Views
236

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top