me again! | Page 2 | on ElectriciansForums

Discuss me again! in the UK Electrical Forum area at ElectriciansForums.net

T

thekingiam

i was wondering what to use to pack around the edges of earthing pit, obviously not all the crap i have dug up.
some peat of a kind? which type would be best? or just get the job done. [ElectriciansForums.net] me again!
 
in that case my solution would be to do what had first had crossed my mind (although after reading the regs and interpriting them incorectly) i would fill with pea shingle and cap with concrete to keep the cosmetic appeal of the driveway aswell as allowing for moisture to saturate the earth rod, and prevent it from drying out.


ill admit when im worng, every days a school day..
also dont deal with tt systems much, so forgive my ignorance.
 
Good point Swicade,
I hope it’s not one of the dreaded “twigs”. At a good depth drying out shouldn’t be a problem so could be made good with concrete. Not so deep then you will need something pervious.
 
I have lost count how many times I have just pulled an earth rod out of dried up ground.

Wood stores built over them

concrete drives/paths above them them.

Then I am getting old and senile so may just be imagining it all............. >2000ohms!!!!!!!
 
Looking at what the OP has done in the pic i'd imagine he's done all the right tests and put the appropriate length rod in.

I've no doubt many rods have been pulled out in the past but who's to say they was put in properly with the right tests in the first place?
 
Last edited by a moderator:
after reading all your pros and cons i am still going to go with pea shingle,my reasons being the whole property is surounded by concrete and tarmac so little water will enter the ground.

- - - Updated - - -

after reading all your pros and cons i am still going to go with pea shingle,my reasons being the whole property is surounded by concrete and tarmac so little water will enter the ground.
 
Why would you not just concrete it back in, the the pit is permanent, in the ground. What would you do if it was a customers and not a family members? I think most customers would want their concrete surfacing reinstated.

Surrounding it in pea shingle IMO would be a total balls up of what look to be a quality neat job.
 
you wont be relying on that 2 inch gap round the pit to keep an 8ft rod damp,look at any tt pit and you wont see it filled around with gravel,its always flush with what the ground surface is,eg concrete,block pave etc.
 
Not sure why everyone is obsessing about an alleged trip hazard. It is against a building, and besides, every house I've ever owned/visited has had literally dozens of levels in the garden and pathways including flowerbeds, brickweave paths, patios, raised beds, drain covers....
Pea shingle filled to the level of the concrete won't create a hazard any more than having gravel on your drive!!!
yes....why has it been sited against the building?....it would have been better a minimum of 1 meter away...where it isn`t going to be intercepting any foundation rubble...or any other crap the original builders decided to throw in there.....
 

Reply to me again! in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
265
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
756
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
743

Similar threads

  • Question
Reminds me of one where I got the DNO in to swap a L - N fused metalclad head in a church got talking to the 2 guys doing it the guy doing most of...
2
Replies
21
Views
2K
I can't help wondering about earthing arrangements and how important aesthetics really are when attempting to make the best of a less than ideal...
2
Replies
21
Views
1K
nicebutdim
N

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top