Metal blanks in AMD 3 boards | on ElectriciansForums

Discuss Metal blanks in AMD 3 boards in the UK Electrical Forum area at ElectriciansForums.net

MFS Electrical

-
Mentor
Nearly Esteemed
Arms
Joined
Jan 31, 2018
Messages
1,277
Reaction score
1,207
Location
Scotland, Inverclyde, Greenock
I hate metal blanks there I said it I simply do not see the point the cover should stay closed itself and if there were an internal fire the mcbs would melt and the fire would get no further than the metal lid what about earthing are you supposed to drill and bolt an earth onto the blank? Scrape away the paint on the Cu and crush the ends of the blank to ensure good continuity?
I also see no point in a metal board if your going to gland tails into it with a plastic gland or use the huge gaping rear entries without intumescent Sealant round the cables like 99.5% of sparks do.... and even at that the cables themselves are not fireproof !!!!
 
metal lid what about earthing are you supposed to drill and bolt an earth onto the blank? Scrape away the paint on the Cu and crush the ends of the blank to ensure good continuity?

I have recently see some manufacturer do just. Isn't life strange (Moody Blues link), that its not just us mere mortals that get our knickers in a twist over 421.1.201, but also some big boy manufacturers. Clear as mud.
 
Well, it has to be to their taste. :p
Im the professional, if i tell them they need a new rcbo amd3 consumer unit, half a dozen downlights, a couple of security lights then they should accept my opinion and have the work done. i dont care for the fact they only asked me round to change the bulb in the bathroom light!
 

Reply to Metal blanks in AMD 3 boards in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
373
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
939
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top