Metal blanks in AMD 3 boards | Page 3 | on ElectriciansForums

Discuss Metal blanks in AMD 3 boards in the UK Electrical Forum area at ElectriciansForums.net

MFS Electrical

-
Mentor
Nearly Esteemed
Arms
Joined
Jan 31, 2018
Messages
1,277
Reaction score
1,055
Location
Scotland, Inverclyde, Greenock
I hate metal blanks there I said it I simply do not see the point the cover should stay closed itself and if there were an internal fire the mcbs would melt and the fire would get no further than the metal lid what about earthing are you supposed to drill and bolt an earth onto the blank? Scrape away the paint on the Cu and crush the ends of the blank to ensure good continuity?
I also see no point in a metal board if your going to gland tails into it with a plastic gland or use the huge gaping rear entries without intumescent Sealant round the cables like 99.5% of sparks do.... and even at that the cables themselves are not fireproof !!!!
 
I just had fish pie tonight, well two of them actually. No idea what kind of fish it was, but it definitely smelled and tasted fishy. All covered in mashed potato and loads of ketchup.
It might have tasted fishy but I didn't say it tasted good. :(
Fish pie just sounds disgusting love fish but dont fancy it with pastry:mask:
 

Reply to Metal blanks in AMD 3 boards in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Sticky
  • Article
Wicked I've just actually looked through it and it's very smart. Some good stuff in it. There's a tile association company that do a magazine...
Replies
2
Views
351
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
313
  • Article
Hi everyone, Another weekend, another sale! Get ready for colder days with Haverland Radiators, combining efficiency with modern design. Keep...
Replies
0
Views
367

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top