Move ccu over 3 metres

[danielph]

I have a situation where i have to move the ccu more than 3 metres, i know i need to intall a new main fuse switch between the distributors cutout and ccu i would just like to know the distances either side and the wiring set up either side.

 

[malcolmsanford]

I have a situation where i have to move the ccu more than 3 metres, i know i need to intall a new main fuse switch between the distributors cutout and ccu i would just like to know the distances either side Of What ? and the wiring set up either side. Again what exactly do you mean

Think if you give clearer understanding

 

[danielph]

Ok lets start again.If you have been asked to move a ccu more than 3 metres on a TT system how would you go about it ?

 

[pushrod]

Ok lets start again.If you have been asked to move a ccu more than 3 metres on a TT system how would you go about it ?

Are you saying that you are moving the CU to 3 metres from the Distibutor's cut out?
If so i would phone them up and ask if they have any problems with that!

 

[GT1]

Yes defo check with DNO. varying responses from them as to allowable length of tails.

 

[Guest123]

Additional switchfuse & 100mA time delayed RCD as a minimum by the sounds of it.

 

[lekkidave]

you need to fit a 100 amp KMF after distrubuters fuse. You can run any amount of tails you want.