Multiple Virgin telephone points

[UKMeterman]

depends if the hub has a ring cap in, the master socket the OP has will also generate a ring signal. A lot of phones have the ring cap inside them.

 

[brianmoooore]

The ring signal is generated inside the modem, so a master socket isn't required. I haven't tried it, but I doubt if there's a ring signal on 2 and 5 out of the modem.
If I'm wrong, and there still is a AC ring signal superimposed on 2 and 5, then the cap. in the master would still couple it to 3.

 

[UNG]

You need to connect pin 3 as well, or you want get incoming ring.

Pin 3 hasn't been needed for many years

 

[snowhead]

Yes they wont connect to the ones i wired. Is that just a lead from the hub into the first telephone point?

B.T wouldn't have connected the house extension sockets unless they were previously fitted by B.T.

Yes, I fitted a socket next to where the hub is and I made up a short double ended B.T plug to B.T plug lead. (431a to 431a)
You can buy them, search BT male to BT male.

bt male to bt male for sale | eBay

Find great deals on eBay for bt male to bt male. Shop with confidence.

www.ebay.co.uk

 

[telectrix]

customer has changed his mind from original spec. charge the bugger.

 

[loz2754]

You had at me Multiple Virgin...

 

[7029 dave]

They used to fit NTE5 same as BT, they usually where fitted side by side. I just wired a link across both front plates, to divert the extension wiring between the two.