Need some opinions | Page 4 | on ElectriciansForums

Discuss Need some opinions in the UK Electrical Forum area at ElectriciansForums.net

F

FreshSpark

I've recently completed a domestic electricians course over the past 6 weeks and have C&G 2393,2382 & 2392. My knowledge of circuit design is good (Ib,In,It , volt drop etc). I've pretty good construction skills also.

Having completed a basic rewire of my small 2 bed home (tested (loop continuity on the rings and r1-r2 on the radials, and insulation tests on the lot) I feel I could do this for someone else, and charge for it.

Obviously there are some gaping holes in my experience but would advertising as a domestic electrician be biting off more than I can chew?

Has anyone here followed this (or a similar) path? Any opinions?
 
To adam W - That of course is very true, but is not a lot of work things that require a similar set of transferable skills. Replacing accessories or faulty/damaged wiring etc I'm sure I can do these things also. I'm not a complete novice I have some DIY experience also.

To Trev - No worries, I understand what you're saying. I'm not friendly with any electricians, otherwise i'd jump at a chance to shadow their every move! What I was thinking is that there is no harm done in taking a look at a job and if it's way out of my league I could simply apologise and say Iit's beyond my skill level.

What would you guys think of this as an idea: I advertise for work, take a look and quote, offer my best advice. I then speak with a local spark and put the work their way but with me tagging along? Kind of sub contracting? Any opinions?

Then get a reputation for being clueless. Work will soon come to a standstill.
 
Important things first: bacon & egg - Brown sauce, tea white with 1, salt & vinegar chipsticks or bbq beef hula hoops.

to dcelectrical
I'm based in mid-sussex, haywards heath/crawley/gatwick/brighton

to stuartcourt
No worries, I was a little taken aback but no harm done ;) To answer your question, I'm 32 and thick skinned!

to sintra
"
Personally I would think that would make you look a bit inexperienced. I know if I was having someone round to quote for a job and they came off with that.

The only way I can see it working is having the spark go with you from day 1."

Yeah I guess it could seem that way. Could it also be seen as thorough though? But you're right, probably best to just go together with a spark from day 1.
 
Then get a reputation for being clueless. Work will soon come to a standstill.

It's not like I would begin the work and then leave a half-arsed job, i'm just talking at an initial quote stage. Word wouldn't spread that I came round, had a look and then didn't quote. I could go another route and just make my price so wildly high that they don't take me on if I feel its too big of a job for me. If they then go with my ridiculous quote though...

Also, i'm not talking about emergency needs doing right now type of work. If I got a call for this type of work i'd have to refer to someone else.
 
It's not like I would begin the work and then leave a half-arsed job, i'm just talking at an initial quote stage. Word wouldn't spread that I came round, had a look and then didn't quote. I could go another route and just make my price so wildly high that they don't take me on if I feel its too big of a job for me. If they then go with my ridiculous quote though...

Also, i'm not talking about emergency needs doing right now type of work. If I got a call for this type of work i'd have to refer to someone else.

This happens more than you think lol.

Only you know in yourself how competent you feel - so just go with the gut and the best of look.

Not trying to scaremonger, because it's the same for all of us on here - if you do something wrong, and someone gets hurt then you're guilty until proven innocent in this trade im afraid.
 

Reply to Need some opinions in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
330
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
856
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
980

Similar threads

Concerning isn't it. I fear it's just going to lead to reduction in standards and entry requirements and flood the industry with even more poor...
Replies
11
Views
1K
  • Question
There could also be a completely unsuitable junction box embedded within the wall and tiled over or just cables in choc blocks in old accessory...
Replies
6
Views
984

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top